2018 tacoma trd pro - biggest wheel/tire option?

What is the biggest tire/wheel size that can be put on with no aftermarket lift?
It has the stock Fox suspension obviously.
I need a touch more beef to it. If anyone has pics of this setup, I would greatly appreciate if you could post.
Thanks!

 

265/75/17

 

I put 285/75 16 on my ‘17 PRO

 

Lift or suspension change?

 

You are entering into the most widely disputed area lol

Most say 265/ 75 or the Pizzia cutters 255/ 80 but then You have guys like this below

But at the same time you have people who rub with those as well. Most seem to do a cab mount chop and those who don’t are often told if they do heavy off-roading they will rub. Real answer, I’ll find out in a month when I put mine on, but it seems subjective and based on a few factors including what rims for offset you have. I don’t claim to be a expert and searching on the forum will yield you with more info then I can provide but just as a FYI a lot of it is polarized as I’m still not sure if I will rub or not with my lift / tire/ rim combo without a cab mount chop as I’ve been told both I will and won’t by a lot of people

 

No, 100% stock. No rub at full lock, normal daily driving, and I haven't had any issue offroad.

 

None

 

what brand wheels and is there an offset?

 

Stock wheels

 

I test fit some 285/75/16 on SCS SR8s -12 offset and was all over my liners and cab mount. Need to get my lift on and alignment done and most likely a CMC while I'm at it.

Those running 33s stock with no rubbing are def the exception and not the rule.

 

tires brand?

 

If you run the stock pro rims you can fit 285/75/16s. Plenty of guys on here do it. No cmc. Some took a heat gun to the liner or make room for mud flap, some don’t.

 

Awesome. Thanks so much.

 

BFG KM3

 

So the 16x7 +13 is the key to no rub... interesting

 

285/75r16 KO2 no lift or trimming and I dont rub at all.

 

I went the same route. Thanks again. She’s got some beef now.

 

Seeing this I regret getting the 17inch wheels during the trd sale. Only thing that pushed me to 17 was the big brake kit I want to get eventually

 

The only issue with 285/75/16’s on a 7 inch pro wheel is uneven tire wear.

 

Do you mind explaining?