2020 TRD Pro Raptor lights

Hi all
To any of you with a 2020 with the front facing camera, I think we have to go with the 4-light setup. The camera is front and center and eliminates the option for 3-light. Has anyone else noticed this. Not a big deal, but I wanted the 3 light look.

 

Yup you’re right, was sort of bummed about this one too. Not sure if I’ll go with the four light option. Still more worth it to have the front cam for sure.

 

Move the lights down to the next row.

 

The camera sort of takes up all three rows

 

Do you have a 2020? We don't need to speculate here.

 

How about a 2 light. Just saw that at a dealer recently.

 

Yup front dead center.

 

Looks like 4 lights are the only way. I like the 4 lights as it looks better to me.

 

The 3 light goes up on the top row. It would be above the camera.

 

I think, due to the size of the camera, the opening above it would be too small to accept the snap-on style raptor lights.
And there may no longer be an opening for the wire to feed through.

 

Anyone have the part # for the front camera?

 

Nope, won't work on the 2020. It has to be 4 lights. There is no room for a light 'above the camera'.

 

Ok. I see. Your right.

 

I have run 4 lights and 3 lights. I personally like the four lights but one of my lights had some moisture inside so I positioned them on the second row down to three lights. I'm done with the grill lights as far a looks go, just a novelty and it has worn off. I do like the four light look better.

 

Is the camera molded into the grill or is it a separate piece?

 

Appears to be part of the mold.
I believe all 2020 TRD Pros come standard with all the cameras.

 

In the 2020 Off Road, the camera is held in place with screws, maybe the pro grille is the same. however, in the OR its below the Toyota Symbol.

 

I did 4 on the top row for my 2020 Pro.

 

4-light, 2nd row.

 

you could go old school...