2021 4Runner TRD Pro Replica Wheels

Will my 265/75R16 Trailrunners mounted on the 16x8" wheels you're coming out with soon, fit on my '21 TRD OR w/o any rubbing issues?

 

Hi guys!

Just wanted to give another update on the New 4TR wheels. The day is upon us, and we will begin shipping them out tomorrow!

We are currently reviewing all pre-orders as we speak and I know some of you might have been unsure about the finish that you ordered.

If you have any questions or concerns about your orders before we begin shipping, please do not hesitate to PM me and I will get you taken care of!

Best Regards,

-Dustin

 

Hello Dustin

Has there been any updates on the OEM center caps?

Johnny said:

Been radio silence on this topic.

 

Anybody have the part # for OEM center cap and ring for this style wheel. I'm sure there will be plenty of guinea pigs on this one.

 

Sorry about the delay on getting to this question.

I am working on getting an answer on the OEM Cap Fitment for you guys. Trying to put a rush on it to see if I can get it figured out tomorrow.

Best Regards,

-Dustin

 

Called your customer service this afternoon & was told that there R no plans to make a 16x8 inch rim. So who's right?

 

Hey Mike!

While we don't yet have this New 2021 4TR being manufactured in 16s, we do have 16x8 Flow Forged 2020 Pro Style Wheels on order and arriving toward the end of June.

This is the style we have coming in 16x8:

 

Will these rims stick out farther then my stock OEM rims? Any issues with rubbing if I run 265/75R16s on them w/o lifting my 21 TRD Off Road? Can I use my TPMS and lugs with 'em?

 

I was just going to buy a set of 17x8 with 0mm offset until I saw this thread. The 8.5 wide wheel looks pretty good.

does anyone have pics with 275/70/17 tires on the 0mm offset version? I’ll buy some right now if they will fit without rubbing with a 1” bilstein 6112 lift.

 

Look at post #103 (page 6). Although @FSW is using 265s I think the outcome would be about the same with 275s. And I gotta say, the look of the Wildpeaks FSW is using looks absolutely killer. I have the TRD Leveling lift which is about 2" all around and I've been having the same indecisions when it comes to which tire to run on these rims with 8.5" and 0 offset. I think we'll be alright with 265 and 275s.

 

Are the black gloss red milled available?

 

I saw that post and they do look good, but the wheel looks a smidge too wide for that tire. I think 275 would look better. I just don’t want to create a roller skate look on my truck and have the tires sticking out too far I really only want the the tire to poke out past the fender about 1/4”-1/2” or so. Keep it clean and minimize rub. That is why I was considering the +5mm 17x8 wheel.

 

If the TRD Sema can be used as a reference, then it would be flush to slightly pass the fender. Since the +4mm 17x7 SEMA is almost about flush on 265/70/17.

 

To answer this, yes they will stick out a little more than the stock offroad rims. With 265 at no lift, you might rub with these rims. On my TRD Sema with 265/70/17, I had some rub under full compression.

 

Any updates on the shipping?

 

just got my notification of shipping label created so they are working on it

 

Good to know. Waiting to get my notification.

 

Orders are being packed and shipped as we speak!

I am keeping a close eye on all forum orders and we are working hard to get them out quickly.

Keep an eye out for shipping notifications soon, they may go in your junk/spam folders.

Best Regards,

-Dustin

 

Subbed

 

Awesome!