255/85/16 with Spidertrax Spacers question...

Hello, quick question for you guys, any help would be much appreciated.

Setup:
2014 Off Road Tacoma
OME Complete Lift (2.5" in front)
Toyota Off Road OEM Wheels
255/85/16 KM2 Tires

I would like to add some Spidertrax 1.25" wheel spacers to push the tires out a little. I was wondering if I would have rubbing issues after adding the spacers. I don't care if I have to trim a little plastic but, would prefer not to have to do a CMC.

Thanks!

 

My setup is similar 1" boras, at full compression with the wheels turned they hit my fender flares, I will be trimming or removing them soon hopefully before they remove themselves. As for the cab mount no issues yet but they come pretty close.

 

Thought I would update this for anyone else looking for pics. I installed the Spidertrax 1.25" spacers tonight.












Steel target holding brake pedal down so I could torque spacers lol:

 

How is this working out for you? I have Bilstein 5100s set at 0 with OME 885s and an AAL for a 2.5" lift in the front and 1.5" in the rear. I am currently running 265 75/R16 Duratracs but have always wanted to go with 255 85s to get a 33" tire. Do you have any rubbing at all?

 

Would be interested to know how it works out for you too. Would like my tc knuckle gussets but there isn’t enough bs in the wheels from my research so wheel spacer are needed

 

I’m about to run this same setup on a 3rd gen. How’d you like running this setup on your 2nd gen?