265/70/17 17" xd addict without a lift?

Hey guys! Im trying to get a 17" xd addicts with -12 offset and 4.53 back spacing on a 265/70/17 duratrac on my 2005 tacoma, but the people at discount tire said that set up is not goin to work without a lift. Is that true?

Or is that set up goin to work without a lift? If yes, is there gonna rubbing and how much trimming I have to do?

Thanks!

 

im wondering the same thing! from what ive read on this forum so far; it'll work. id like to hear from others and how does it look without a lift?

thanks

 

I had 275/70/17 on my old truck (Duratacs on sport wheels). I had a lift with 5100's in the front set at 2.5 and it cleared with no problem.. Sounds like your right on the edge of working or not.

Hope that helps in anyway..

 

I don't run that size, but if you check the tire calculator drop down menu, there is only 1 inch of difference between that and the TRD OF tire. There should be no issues with the tire size. But like I said I don't run these. I'm sure someone will pop in with better information.

And as for backspace etc... no idea.

Frank

 

http://www.tacomaworld.com/forum/wheels-tires/67550-largest-tacoma-tire-sizes-stock-suspension.html

Probably no rubbing, if you do rub it would be minor. Takin off the front mudflaps and cutting a little bit of plastic off of the front of the wheel well is probably all you would have to do. Im not speaking from experience, this is just what i have read on this site. Alot of guys run that size with no rubbing

 

Heres an example

Thats 17x9 with 4.5 BS -12 offset