285/70/17 Lift needed?

I am about to lift my 2018 Tacoma and put on 285/70/17 on SCS 17" Ray10 Wheels. Does anyone know the reommended lift to ensure there is no rubbing?

 

Should technically fit but I'm sure it'll rub a bit. I've got 285/75/16 on vtx classics which are a - 12 offset and I just barely rub the cab mount while offroad. I'm lifted 1.5" and TRD Pro which is supposedly 1" higher from the factory. When it was stock it just rubbed a bit more.

 

So if I raised my trd off-road 2.5 or 3 it should all work out it seems?

 

Definitely. May need wheel spacers and a cab mount chop depending on those wheels

 

I’m sitting on a 3/1 inch lift. Have 285/70/17 and there is no rubbing at all.

 

I’m running 1” up in the front and stock in rear with 285 70 17s and no rub when driving straight even compressed.
But once i turn 1/2 lock either way under compression I rub.
Going to do a CMC and that should solve the problem.

 

You should be fine with your typical 2-3 inch lift. The turd gens have a lot more room to play with in the wheel wells.

 

Just got everything done. Did a 2.5 Bilstein 5100 lift on my 2018 Tacoma Off-Road. Put on 295/70/17 on SCS Ray 10 wheels (17x8.5). Perfect fit, no rub at all! They said it was more about the wheels than the tires. 4.3 BS with -10 offset that made for the no rub.