285/75/16 Looking for the right offset

What would be the right offset wheels for my tires?

 

Further out u go the more issues with clearane. I'm at - 12

 

Looking good. Love the cut in the bumper. Looks clean

 

What wheels are you using, looks clean! I’m trying to just find the right wheels so it can come slightly out from my fenders

 

I run 0 offset with those tire specs on a 2" lift and I'm almost exactly flush with the fender

 

These are Yokohama geolandar MT. Very similar to toyo open country, but cheaper by a bit. Got them for 700 bucks, couldn't pass that deal up!

 

BTW the bumper cut was super easy. Makes it look much more open and aggressive, how it should come. Plus Im doing ucas and moving the wheels as far forward as possible, wanna make sure I didn't rub.

 

I run zero off set with 4¾ back space with 285/75/16 toyo open country rt, only minor cmc with 3" lift. Tread of tire flush with body, only the side wall slightly outside of the body.

 

What’s your backspacing and do you have any clearance issues at the UCA?

 

Whatever gets you >4.5" of backspace.
7.5=>12
8"=>0
8.5"=>-12
9"=>-25

 

17x9 -12 anything more than -12 sticks out too far for my taste

 

8” wide wheel 0 offset is what I have. I think it’s a great dimension. You avoid a lot of clearance issues and it gives a nice poke. I have 255/85r16 and they are outside the wheel well just a smidge.

 

4.5" UCA has some room, I think any less backspace would rub. I think it could depend on the tire too

 

So with my 17x8.5/et0 Trubomacs at 4.75”bs, I’d likely run into clearance issues at the UCA. I’ll probably end up going with a 255/80 in that case.