285/75/16 with 3" lift, 16x8 4.5 backspacing and 0 offset?

Can I fit 285/75/16 with 3 lift 16x8 4.5 backspacing and 0 offset

 

No you have to trim plastic and do a cmc

 

What he said. ^^^

 

I’ll correct myself. It will be close. I’m running 285/70/17 on 18.5 -10 3” lift no rubbing or cmc. But I have jba ucas and caster set at 4 degrees. Also didn’t trim any plastic. So it can be done. Set up just has to be right.

 

I do light trials to my camp sites etc, my doesn’t rub at all, it not close to the fender, its never hit the cab mount. Now if he’s taking his prerunner up big trails which I doubt no need to do stuff that’s not needed.

 

My doesn’t rub at full lock going forward or backing up, why would I do a cmc I don’t need.

 

A couple factors are at play. Stock vs after market uca, tire brand and the actual measurements of your “3 inch lift” from center of hub to bottom of fender flare? My front measures 23.5 on both sides. 4.5 back space is a great choice with a 285 tire. You will clear the upper control arms regardless of stock or Aftermarket. Also, please do some research on 16 inch rims clearing our brake calipers.