285/75/16

Good afternoon guys, I’ve been doing some research and looking at different forums but haven’t found anything for my exact application and wanted to ask a few questions about something. So I recently installed bilstein 5100 front and rear shocks, the fronts maxed out at 2.00 with stock springs, and added 1 inch block in the rear, I currently have 265/75r16 trail grapplers that will need to be replaced by the end of the year and I’m wanting to upgrade to 285/75/16 all terrains and want to use the stock off road wheels for the time being till I can afford aftermarket ones with offset, and I read that I would probably need wheel spacers to clear the uca. Is there anything else I will need to fit the 285s? Any help or advice is appreciated!

 

bora 3/4" wheel spacer is all youl need. any bigger than 3/4" and youl start having to cut more things

 

Do you do any off roading or is it just for on road use?

I’m not asking to make fun of how you use the truck, just asking because I had 285’s on the bilsteins and didn’t have any rubbing on-road. Off road you might get some rubbing at full flex though. Can’t say for sure because I have aftermarket wheels that have a -10mm offset, so not completely identical to your setup.