2nd Gen 4.0L V6 Tacoma fabricated solid motor mounts for sale

Ahhh gotcha. I get asked this all the time, and my response is that's its less noticeable than an aftermarket exhaust.

The poly mount keeps the engine from bouncing all around over rough terrain. These mounts are meant for off road trucks that get used. I can see how hitting a big pothole or sharp speedbump could make it feel like a rougher "hit" but in reality all you are feeling is your drivetrain staying right where it's supposed to, instead of flopping all over.

 

I feel a little more vibration when starting the engine, driving over bumps in the road, and slightly more at idle. I changed my radiator support bushings from the universal kit to the vehicle specific kit tightened things up a bit.

 

If your truck is primarily used for street driving, or its a "show truck" then you wont really benefit from a solid style motor mount. I have sold a few sets to street racers with lowered, boosted and turbo'd tacomas, and they do say it feels snappier off the line as the drivetrain isn't flexing and wasting engine energy. However for the average guy with a street truck and a lift kit, there is really no point. You will never (or most likely never) use your truck offroad hard enough to damage the engine mounts or cause a related failure. And if you are using your truck off road, then a tiny amount of vibration that you will really only feel idling on the street isnt a concern...keeping your drivetrain in place and not having to spend thousands in repairs is a better tradeoff lol.

 

I resemble that remark.

 

I still want to do these... badly. Just waiting until I can throw the $$ at them and have the time to install.

 

Desert season is almost here! FYI I have parts to make 2 sets of 4.0L motor mounts right now! About a week turn around time from the day you order! See PayPal instructions below!

 

Whenever the 4x4 manual transmission 4.0l mounts are available I'll order! I want to do solid engine and transmission mounts. I'll be checking back time to time for updates

 

Sent in my order

 

NICE

 

Both sets sold!

FYI I am always building parts so if anyone wants a set place an order and I will get on it!

 

I hope to be aiding in one of those installations soon.

 

FYI, I have everything to make a set of 4.0L motor mounts right now before I have to re-order. Faster turnaround if anyone wants a set!

 

Just finished building these! 4.0L V6...available for sale now! No waiting. First come first served! Can ship out next day!

 

Have you ever made any for the V8 4Runner?

 

No not yet. The 4.7 v8 block would be the same as the tundra but the distance to the frame perch and the geometry would most likely be different. I would need a stock set of engine mounts to prototype off of.

 

BUMP for engine mounts available now. I never have any in stock so this is a rare occasion!

 

BUMP! Can ship out asap!

 

Has anyone been in contact with Ryan lately?

 

I'm here! Just replied to your DM.

 

Pm back. Thanks