2nd Gen 4.0L V6 Tacoma fabricated solid motor mounts for sale

4x4?

 

Yes its 4x4 manual transmission.

 

count me in

 

Awe I'm out need an auto version

@EatSleepTacos

 

Don’t you be spending my money for me.

 

He has motor mounts too..........

 

I can weld up the plates if you have any interest in sending stuff denver way. I need one set regardless for my 2nd gen. I am interested in just the cut plates and bushings if you have sourced them yet.

 

These are only going to be sold as a welded completed unit. A weld fixture is required to properly locate/assemble and weld the kits up.

 

@ovrlndkull hey dude not trying to get ur hopes up but can u post a Pic of the trans mount on the auto cause I believe they might be the same

 

I think we are good. Should work for all 2nd gen tacomas that are 4wd. Manual and Auto.

Also will work for 2007 -2014 4wd 4runners (I believe they are all auto)

Ignore the image, they often use a "stock" photo that isn't representative of the actual part. The parts numbers and descriptions/application is what I go off of.

 

Interesting, I check and see that 123710P041 says it fits my manual trans, and also automatic trans. In fact, I have an auto and manual trans truck at my house so I can go out and take a look to confirm if they are indeed the same haha. I'll take a set of the motor mounts and the trans mount. With the crawl box, my shifters like to turn sideways on tough trails in double low

 

Interested in a Motor and Trans Mount Group Buy.
2008 V6 6sp 4X4

 

I am interested in the same!

 

First draft of the mount. Every part has certain nuances that need to be fine tuned to make an efficient production part. So there may be slight changes in appearance or process. But this is basically it. Going to hopefully get it to my test mule soon to 100% verify and give me feedback!

 

Prototype looks sweet!

The mounts do look exactly the same between auto and manual, I went out and snagged a few pics, nothing scientific here but from a few feet away they look identical. Here’s the mount from an A750F, don’t mind the rust




RA60F

 

Awesome!! Thanks for the pics!

 

New part next to the OE mount.

 

will the finalized version have the crossmember mounts threaded? Looks like just a drilled hole in the picture.

 

These will ship with new bolts and nuts. Been doing all the trans mounts that way for a long time since you need some "slop" with a polyurethane mount that wont flex like rubber. If I drilled and tapped like the stock mounts, there's a good chance that many wouldnt bolt up correctly due to slight variances in the frames as well as crossmember movement due to offroading.

 

makes sense, thanks for the explanation!