1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

3.4 taco timing belt question.

Discussion in 'New Members' started by seanlong138@, Aug 18, 2018.

  1. Aug 18, 2018 at 1:36 AM
    #1
    seanlong138@

    seanlong138@ [OP] New Member

    Joined:
    Aug 18, 2018
    Member:
    #263196
    Messages:
    1
    Gender:
    Male
    I have a 1999 taco, and replaced the timing belt. The belt has markings for R and L cams and Crankshaft. I had them all lined up on install. However when I crank the belt over a full revolution the marks on the belt change over to the driver side by one tooth each revolution of the belt. Two rotations of the crankshaft TDC equal one rotation of the cams rotation and all are on TDC. Are the marks just for installation purpose to line up and is this normal?

    Thanks in advance!
     

Products Discussed in

To Top