1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

3.4l Tacoma squealing bad!

Discussion in 'Performance and Tuning' started by CorbitTRD, Jan 30, 2014.

  1. Jan 30, 2014 at 7:39 PM
    #1
    CorbitTRD

    CorbitTRD [OP] Well-Known Member

    Joined:
    Feb 6, 2013
    Member:
    #96944
    Messages:
    165
    Gender:
    Male
    First Name:
    Corbit
    Gadsden Alabama -Ft Bragg NC
    Vehicle:
    2012 Tacoma DCSB OR
    Pelfreybilt bumper Method NV wheels Nitto Terra grapplers
    Ok so my truck it's squealing bad. The radio can't even drown it out anymore. It doesn't squeal at start up or idle but only when I'm driving an take my foot off the accelerator. It squeals till I apply the brakes an slow down or if I push back down on the accelerator. It use to only squeal when I had been driving for about an hour or so but now it does it every time I drive it. I've replaced the serpentine belts awhile back assign that didn't help. I thought it could deal with the timing belt like maybe the idler pulley? Idk I need help cuz I'm going crazy!!!!
     
  2. Jan 31, 2014 at 7:07 AM
    #2
    Torspd

    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    26,300
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    Idler pulleys perhaps.
     
  3. Jan 31, 2014 at 7:26 AM
    #3
    whahahajr

    whahahajr Lone Star Club

    Joined:
    Jun 24, 2012
    Member:
    #81279
    Messages:
    640
    Gender:
    Male
    First Name:
    jimbob
    New Braunfels, Tx
    Vehicle:
    07 Tacoma TRD
    Camburg Uniball UCA, ARB Front Bumper, TAG rear bumper, OME rear shocks, All Pro 3" leaf springs
    Only when your moving? Are you sure it's not a hub bearing or something. Brakes?
     
  4. Jan 31, 2014 at 1:06 PM
    #4
    CorbitTRD

    CorbitTRD [OP] Well-Known Member

    Joined:
    Feb 6, 2013
    Member:
    #96944
    Messages:
    165
    Gender:
    Male
    First Name:
    Corbit
    Gadsden Alabama -Ft Bragg NC
    Vehicle:
    2012 Tacoma DCSB OR
    Pelfreybilt bumper Method NV wheels Nitto Terra grapplers
    It happens at certain rpms basically higher rpm it stops but lower it squeals
     
  5. Jan 31, 2014 at 3:35 PM
    #5
    CorbitTRD

    CorbitTRD [OP] Well-Known Member

    Joined:
    Feb 6, 2013
    Member:
    #96944
    Messages:
    165
    Gender:
    Male
    First Name:
    Corbit
    Gadsden Alabama -Ft Bragg NC
    Vehicle:
    2012 Tacoma DCSB OR
    Pelfreybilt bumper Method NV wheels Nitto Terra grapplers
    so i just checked some pulleys. an the tesioner pulley is on the very bottom right? well if so i checked it an it wiggled a decent amount. could that be the source?
     
  6. Jan 31, 2014 at 3:48 PM
    #6
    Torspd

    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    26,300
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    If you remove the accessory belt, then you can spin the pulleys by hand. You'll be able to tell really quickly if any have play, or generally sound rough spinning.

    Like the tensioner pulley.
     
  7. Jan 31, 2014 at 4:41 PM
    #7
    CorbitTRD

    CorbitTRD [OP] Well-Known Member

    Joined:
    Feb 6, 2013
    Member:
    #96944
    Messages:
    165
    Gender:
    Male
    First Name:
    Corbit
    Gadsden Alabama -Ft Bragg NC
    Vehicle:
    2012 Tacoma DCSB OR
    Pelfreybilt bumper Method NV wheels Nitto Terra grapplers
    Ok I'm gonna try that in the morning for sure
     
  8. Feb 2, 2014 at 3:24 PM
    #8
    Mickla007

    Mickla007 New Member

    Joined:
    Feb 1, 2014
    Member:
    #122008
    Messages:
    3
    Gender:
    Male
    First Name:
    Michael
    Houston, TX
    Vehicle:
    01 PreRunner SR5
    I have the same issue, squeal coming from under the truck somewhere from the mid point back it sounds like. It does not happen during idle or acceleration but as soon as I let off the gas it starts and will continue down to about 15 or 20 mph or so. I have also replaced the belts and it did no good. Seems to happen more when it's cold outside.
     
  9. Feb 3, 2014 at 1:36 PM
    #9
    Mickla007

    Mickla007 New Member

    Joined:
    Feb 1, 2014
    Member:
    #122008
    Messages:
    3
    Gender:
    Male
    First Name:
    Michael
    Houston, TX
    Vehicle:
    01 PreRunner SR5
    I'm able to put my truck in neutral, kill the engine, cost and still get the noise. With the engine off that pretty much rules out any belts or pulleys right?
     
  10. Feb 3, 2014 at 2:12 PM
    #10
    whahahajr

    whahahajr Lone Star Club

    Joined:
    Jun 24, 2012
    Member:
    #81279
    Messages:
    640
    Gender:
    Male
    First Name:
    jimbob
    New Braunfels, Tx
    Vehicle:
    07 Tacoma TRD
    Camburg Uniball UCA, ARB Front Bumper, TAG rear bumper, OME rear shocks, All Pro 3" leaf springs
    ujoints?
     
  11. Feb 4, 2014 at 4:48 AM
    #11
    CorbitTRD

    CorbitTRD [OP] Well-Known Member

    Joined:
    Feb 6, 2013
    Member:
    #96944
    Messages:
    165
    Gender:
    Male
    First Name:
    Corbit
    Gadsden Alabama -Ft Bragg NC
    Vehicle:
    2012 Tacoma DCSB OR
    Pelfreybilt bumper Method NV wheels Nitto Terra grapplers
    Well wasn't the tensioner cuz I ruled it out for sure.
     
  12. Feb 4, 2014 at 5:12 AM
    #12
    Mad T

    Mad T Well-Known Member

    Joined:
    Jan 12, 2010
    Member:
    #29217
    Messages:
    537
    Gender:
    Male
    First Name:
    Thomas
    Georgia
    I have the same problem with my truck. It happened last winter and I took it to a shop and they couldn't find the problem. By summer it completely went away but guess who shows up this winter?! Yep the squeek... We need to figure it out!
     
  13. Feb 4, 2014 at 2:42 PM
    #13
    CorbitTRD

    CorbitTRD [OP] Well-Known Member

    Joined:
    Feb 6, 2013
    Member:
    #96944
    Messages:
    165
    Gender:
    Male
    First Name:
    Corbit
    Gadsden Alabama -Ft Bragg NC
    Vehicle:
    2012 Tacoma DCSB OR
    Pelfreybilt bumper Method NV wheels Nitto Terra grapplers
    Ok mine also squeals even when i turn it off an coast. WTF!?
     
  14. Feb 4, 2014 at 6:37 PM
    #14
    CorbitTRD

    CorbitTRD [OP] Well-Known Member

    Joined:
    Feb 6, 2013
    Member:
    #96944
    Messages:
    165
    Gender:
    Male
    First Name:
    Corbit
    Gadsden Alabama -Ft Bragg NC
    Vehicle:
    2012 Tacoma DCSB OR
    Pelfreybilt bumper Method NV wheels Nitto Terra grapplers
    I've been doing a lot of research an I think it could possibly be a bad rear axle bearing. But still not sure...
     
  15. Feb 5, 2014 at 9:27 AM
    #15
    Torspd

    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    26,300
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    Drivetrain bearing of some sort.

    The carrier bearing, or axle bearings. If it is an axle bearing, you can touch the hub after driving. If it is really hot to touch, then the bearing is bad.
     
  16. Feb 5, 2014 at 8:43 PM
    #16
    CorbitTRD

    CorbitTRD [OP] Well-Known Member

    Joined:
    Feb 6, 2013
    Member:
    #96944
    Messages:
    165
    Gender:
    Male
    First Name:
    Corbit
    Gadsden Alabama -Ft Bragg NC
    Vehicle:
    2012 Tacoma DCSB OR
    Pelfreybilt bumper Method NV wheels Nitto Terra grapplers
    Im replacing my carrier bearing possibly tomorrow so we'll see if that was it ill update as soon as I find out
     
  17. Feb 6, 2014 at 2:31 PM
    #17
    CorbitTRD

    CorbitTRD [OP] Well-Known Member

    Joined:
    Feb 6, 2013
    Member:
    #96944
    Messages:
    165
    Gender:
    Male
    First Name:
    Corbit
    Gadsden Alabama -Ft Bragg NC
    Vehicle:
    2012 Tacoma DCSB OR
    Pelfreybilt bumper Method NV wheels Nitto Terra grapplers
    Well gotta wait for the part so it'll be a couple days
     
  18. Feb 12, 2014 at 12:12 AM
    #18
    CorbitTRD

    CorbitTRD [OP] Well-Known Member

    Joined:
    Feb 6, 2013
    Member:
    #96944
    Messages:
    165
    Gender:
    Male
    First Name:
    Corbit
    Gadsden Alabama -Ft Bragg NC
    Vehicle:
    2012 Tacoma DCSB OR
    Pelfreybilt bumper Method NV wheels Nitto Terra grapplers
    Its been snowing here do no real update besides I haven't heard the noise in two - three days so idk Im probably still gonna replace the Carrier bearing just waiting though
     
  19. Feb 13, 2015 at 8:00 AM
    #19
    Mivy7

    Mivy7 New Member

    Joined:
    Feb 13, 2015
    Member:
    #148546
    Messages:
    1
    Gender:
    Male
    Vehicle:
    2002 Prerunner TRD (step-side)
    I have read a lot of forum replies on this and I can tell you this. I had the same exact problem (squealing only when letting off the gas /cold weather only/. I bought a $25 grease gun and lubed all the drive shaft zerks. No more problems. My truck had 260000 miles with no lube maintenance on the drive shaft.
     
  20. Feb 13, 2015 at 5:36 PM
    #20
    CorbitTRD

    CorbitTRD [OP] Well-Known Member

    Joined:
    Feb 6, 2013
    Member:
    #96944
    Messages:
    165
    Gender:
    Male
    First Name:
    Corbit
    Gadsden Alabama -Ft Bragg NC
    Vehicle:
    2012 Tacoma DCSB OR
    Pelfreybilt bumper Method NV wheels Nitto Terra grapplers
    yea i got a grease gun from work and didnt have any problems for awhile and i heard a faint hint of the squeal the other day so its about time to get under and grease it up again
     

Products Discussed in

To Top