3 inch Spacer for 6 inch lift

So I have decided to upgrade and go from a 3 inch lift to a 6 inch pro comp lift kit. I really want to keep my 5100's that I am running in the front with my 886 OME coils but don't want to be topping at a full 9 inch lift with the ugly 6 inch spacer. I was wondering if anyone could inform me or point me towards the direction of a thread or some information on where I could get a 3 inch spacer to put on my 3 inch coilover to achieve the 6 inch lift like that. Please help me out!
Alex

 

http://lmgtfy.com/?q=where+do+i+buy+3+inch+front+spacers+for+2006+toyota+tacoma

 

sry dude not tryin to be a dick , should be a standard 3" spacer , You should be able to find a pair used from someone else thats upgraded as well . I gotta a pair of 2.5 or 3 on my box at work , ill measure them tomorrow and let me know if you want these for shipping cost , i dont need em...

 

Haha thanks........
I ended up making a few phone calls and figuring it out. I was really just wanting to make sure that I could use it with the specific lift. And find a spacer that went over the top hat and not between, compressing the coil down further.

 

I would not call going from a functional 3" lift to a show 6" lift a upgrade.

 

I have a 3" procomp lift going to a 6" DB lift. I can just put a 3" leveling kit spacer on top of that and I will be fine?

 

I tried to do it with mine and it didn't seem like they were long enough with a 3 inch spacer. My Spacer I orded just seemed a bit short. I'm going to look around a bit more and see if I can find a legitimate 3 inch spacer though because I'd really like to use my setup rather than some stock billsteins on stock coils with that big 6 inch spacer.