33” Spare

Hello,

I recently put some 33” tires on my truck, i was wondering were you guys would keep a spare? Any suggestions, ideas. Thank you

 

Remove the hoist bracket ..relocate an inch drill new hole..paint..reattach hoist bracket. You may need to have your exhaust bent slightly

 

Or cut your exhaust over the rear axle to not worry about it being in the way

 

i was able to fit mine. i had to removed the two metal brackets securing the stock spare, it doesn't touch my exhaust pipe.

 

I just smacked the alignment plates with a hammer till it fit.

 

This -

My 33" fit without any other beating on brackets or exhaust.



J

 

Ours (285/75R16) went into the stock location with no massaging.

 

Keep it in your bed? Sign up for AAA or another roadside assistance program.

 

I run 275/70R18's and have a spare underneath, it will fit will a little adjusting.

 

I have a 255/85 there too with no adjusting, except when I added my RCI rear bumper, the hitch tube was about 2 inches too long and had to be cut.

 

I've always wondered if guys with 285's could run a 255 as a spare since it tucks up better and is the same diameter