3rd Gen. Coils?

Anyone know for sure if the coils from the 2nd or 3rd gen can fit on the 1st gen Tacoma?

I know the top hat is smaller on the first gen. But could the coils be used?

I see people running the 883 or 884 OME coils and those I believe are the same for all years??
(I could be mistaken)

But because the coils on my 1st gen is 20+ years old, I have several sets of 3rd gen parts sitting around.

So hoping someone knows if they are compatible?

 

If you have all the parts handy, I'd just do some measuring. But I've never heard of anyone adapting 2nd\3rd gen coils (or any front suspension) to a 1st gen.

 

That's probably what I'll do. I have a commercial coil compressor so it's not that much trouble.
I was just hoping someone might have tried this already.

 

Physically, they'll fit.

Why do it though?

The correct coils to use aren't even expensive, that and 2nd/3rd Gen Tacoma's are much heavier so putting them on a 1st Gen would make it ride like shit.

Being factory oils, it only makes sense to refresh your entire suspension.