3rd Gen OEM Tonneau cover kit

I’m looking for some help. When my 21 was totaled, I got to keep the OEM tri fold tonneau cover. I finally got a new taco yesterday, and I want to put my tonneau back on. Can anyone point me in the right direction to where I can find the brackets to install the cover again?

 

Out of curiosity: would you still be able to go get them off the old truck? I imagine that is at a salvage yard somewhere.

 

This post might be helpful:

https://www.tacomaworld.com/threads/oem-tonneau-cover-where-to-buy.533401/page-17#post-22845027

Specifically, I think you'll need these for the sides:

69442-04010 - Striker, Tonneau Cover Side No.1 (Qty: 5)
69442-04030 - Striker, Tonneau Cover Side No.2
69415-04020 - Cover, Striker No.1 (Qty: 5)
69415-04040 - Cover, Striker No.2
64949-04010 - Screw, Striker (Qty: 12)
64935-04010 - Bolt, Striker

And these for the front:

64933-04010 - Pin, Tonneau Cover Front
90148-A0006 - Screw, Front Pin (Qty: 2)

 

I think I pulled most of it off, but I believe the center back bracket was broken in the accident so I will definitely need to replace that. I wanted to match up a “kit” with what I have to see if I’m missing anything else.

 

Awesome, thank you!

 

Oops, forgot, you might also need the bed rail caps, depending on what you were able to keep.

Short Box, 5':
66248-04070 - Cover, Bed Side RH
66249-04070 - Cover, Bed Side LH

Long Box, 6':
66248-04060 - Cover, Bed Side RH
66249-04060 - Cover, Bed Side LH

 

The center back bracket should be these...I think:
64933-04010 - Pin, Tonneau Cover Front
90148-A0006 - Screw, Front Pin (Qty: 2)

 

I bought a used OEM tonneau for $150 and spent close to $200 for parts. The dealership wanted almost $8 each for the 64949-04010 bolts, so I sourced them from a local hardware store. For the other items you're probably going to have to go to a dealership. I had to buy the parts individually. Not aware of a kit. I broke my center pin (64933C) years ago and the tonneau is fine without it. I'd skip that part and save some $. Also take note that the front passenger bracket, although they have the same part numbers 69391 and 69415F, they are different than the other five. They have "NO.2: as a suffix and the other are "NO.1"
For the rail caps I marked my normal ones with a silver sharpie then pulled them off and cut them with a utility knife.

 

Found a OEM tonneau here for free back in 2021 just needed all the hardware, spent $200 for everything. I believe 64935-04010 was almost a $20 bolt