3rd Gen PID's for OBDLink

well I had a nice 1.5 hr long drive sunday and let torque do a full scan, needless to say it didn't find any pids related to the TT temps. it found about 4 extra pids, but they mirrored the coolant temp exactly so that didn't work. I did a screen shot of all the pids found but I think I need to redo them since they kinda came out as 1 long a.ss screenshot.

 

Does this allow monitoring of TCC PWM and SLU status?

 

would love to find the PID for rear diff temp if available. the front diff is there in OBD Fusion with the Tacoma add-on, but no sign of the rear.

and if anyone knows what Injection Modes 0,1,2 reflect that would be awesome as I'm trying to understand the switches from otto to AC.

 

The rear diff lacks a temperature sensor.

3 modes? Sould be start-up, port+direct and direct, no?

 

Any update on PIDs?

 

OBD2 Mode and PID: 221627
Long Name: Transmission Fluid Pan Temperature
Short Name: TF1 (pan)
Minimum Value: -40
Maximum Value: 350
Scale Factor: x1 (do not change)
Unit Type: F
Equation: (A*459/255)+(B*1.6/255)-40
OBD Header: 701
Diagnostic start command: (leave blank)
Diagnostic stop command: (leave blank)
Overrides PID: Does not override any PID

OBD2 Mode and PID: 221628
Long Name: Transmission Fluid Post-Converter Temperature
Short Name: TF2 (conv)
Minimum Value: -40
Maximum Value: 350
Scale Factor: x1 (do not change)
Unit Type: F
Equation: (A*459/255)+(B*1.6/255)-40
OBD Header: 701
Diagnostic start command: (leave blank)
Diagnostic stop command: (leave blank)
Overrides PID: Does not override any PID

 

I'm getting -40 for Pan Temp in the middle of summer. No changes to that number at all. Does anyone have any advice? I've triple checked all PID information was added correctly.