3rd Gen Remote Start Using OEM Remote

So i just went out to my truck and verified the door locks are mechanical and not electric meaning if the door is locked and I pull the door handle it unlocks the door and opens.

I would say it not electric. You should be able to exit the door no matter what because pulling the handle from the inside bypasses the lock

 

Okay. To get that though, you're going to need to trade your Tacoma in on a different brand which allows that to happen.

 

How many times are we gonna talk about this

 

Thanks fellas. I'm hoping it was just some fluke due to the cold weather. We shall see. That said, if that's the worse thing that goes wrong with my truck I'd be pretty stoked.

Regardless, starter works great!

 

Is having to push the start button really that hard? What do you do when you don't use the remote starter during warm weather?

 

Infinity + 1

 

Try putting some grease in the door lock latch it could be binding because of the cold. Maybe they forgot that along with the trans fluid

 

I'm in love with this shit:

$21 BOESHIELD T-9 Rust & Corrosion Protection/Inhibitor and Waterproof Lubrication, 12 oz.

https://www.amazon.com/gp/product/B001447PEK/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

 

Brrr... cold here in Atlanta. I need to get his thing installed quick!

 

Yep, 16F Saturday night here, though warming back up next week.

It'll also be real handy on July afternoons.

 

I dont even want to hear it

 

I foresee taking a sick day Monday assuming I can even make it out of the driveway

 

Id rather have a shit ton of snow then be frozen

 

I chose to skip both of those twenty years ago and haven't looked back.

 

http://www.ebay.com/itm/2014-2015-2...ash=item3f72e66b4c:g:fygAAOSw6DtYVX6U&vxp=mtr

Came across this on ebay. Just wondering why there is only 2 other wires other than the obdi wires, when the kit we are installing has more than that? Is there a different way to wire to minimalize the amount of different adapters we need to tap.

$160 for a plug and play solution now makes that $130 seem very steep.

 

Well that's interesting. I'm almost tempted to order one just to figure out what they did

 

That harness looks like the way to go, I would much prefer going this route than messing will all the wires in the Voodoo kit which I already have. be nice to see some install instruction for this kit.

 

Yes, very curious. He's showing a

$59 DBALL2 Databus All Combo Bypass Module

DBALL2, and the *manufacturer's* instructions use a bunch more connectors that I don't believe go to the OBD port.

 

I just sent the seller a email asking for install instruction.

 

Cool, do share what you hear back.