3rd gen trd pro wheels

Tire size? Looks good.

 

Those are stock wheel sizes. Rims are 16x7 and the tires are Toyo Open Country’s 265/70/16.

 

I'd trade my sr8's straight up for a set of these....I love how they look on a 2nd gen!

 

lets shoot this to the top. Maybe some spring freshies kicking around now?

 

I’m going back and forth with these and the 17” TRD/SEMA wheels and am having a real hard time deciding which way I want to go. I think the 16” PRO wheels look better but 17” has more tire options if I don’t like/want to run 255/85s.

 

Man those look good! Tire size?

 

Thanks, 295/75/16.

 

Just put ST MAXX 255/85r16 on.

 

Well back to my original plan to go with these because the 17" FJ steel wheels would have been $$$ to have powder coated and in the end would have been more expensive than alloys. Plan is to put 255/85 ST Maxx or KM2s on them.....have a couple of weeks to figure that out.

 

Ordered the wheels last night....no going back now.

Now to decide on KM2s or ST Maxxs.....good thing an unexpected vet bill will now give me another month or so to decide.

 

Must post pics when install is done

 

Not so far. Took it on a couple light trails and it was good to go!

 

Hey OP, or anyone who knows, in this photo am I looking at a 2nd generation truck with TRD Pro wheels (intended for third generation)?
My truck is 2nd generation and I'm trying to figure out if TRD Pro 16" wheels will fit on my truck. All the dealers won't commit to saying these wheels will fit because Toyota did not make them for older trucks. The hole pattern is the same, though the offset is different. Can someone, especially OP, confirm these rims fit 2015 tacoma 4x4? Also, I'm thinking of getting 265/75's. Will they splash dirty rain water, mud onto my body because they exceed the fender by a tiny, tiny bit? Any help regarding these specific rims with this specific size tire would be appreciated. OMG this is difficult to figure out

 

Yes, 3rd Gen Tacoma Pro wheels, no issues with fit.

Here's mine (posted earlier) for reference:


I took a while between 16" Pro wheels and the 17" SEMA 9 (4Runner Pro) wheels, but at the time the 17"s were next to impossible to source, since then you can get them easily (I'm in Canada for reference). No regrets with my decision.

Once after hockey this other 2nd Gen with the 17" parked next to me at the rink and I thought, hmmmm, but I"m still happy with my choice.

 

Those Maxx's look great do you get any rubbing in that size?

 

I had some minimal rubbing but not after I had an off road shop do a proper alignment for oversized tires. Love them so far. No regrets.

 

I approve of this truck's looks. One thing, though. I can't tell if OP's truck is a 4x4. Does anybody know if there are fitment problems when putting these TRD Pro 16" wheels on a 2nd Gen TRD Sport when said truck is a 4x4 with a tow package? I want to get these very same wheels, but am wondering if my 4x4 with tow package changes anything.

 

They will be fine! Tow package won't effect this....

 

Okay, I just committed to getting the wheels and tires that I wanted. I have the 2nd Gen Tacoma and just this week installed 16" TRD Pro wheels with B.F Goodrich AT KO2 tires, size 265x75R/16. On the first test ride, there was rubbing. It's not so bad. All it was was the front mud flap that is forward of the front wheels. Those flaps hit the tires during tight turns. The solution was to cut the flaps shorter. And Bob's your uncle.

https://imgur.com/8yhTrT5

https://imgur.com/8EtffHB

https://imgur.com/dVicBIe