3RD GENERATION MATTE BLACK TACOMA HOOD STRIPES

SgtPuddin · Apr 23, 2018

Would it be possible to cut this decal to match the hood?

Bigdaddy4760 · May 1, 2018

Installed my hood decal this morning, like the way it turned out.

NIU_Huskies · May 1, 2018

mcmnos4r2[OP] said: ↑

Click to expand...

So do these only work with non-scoop (Off-road) hoods? I have a TRD Sport with the hood scoop.

mcmnos4r2 · May 1, 2018

Yes, they are only for scoopless hoods, sorry.

SgtPuddin · May 2, 2018

Not sure if this was mentioned before, but what kind of vinyl are these decals made out of?

mcmnos4r2 · May 2, 2018

Avery matte black 6 year vinyl.

SoulArmored · May 2, 2018

How do I order 1 of these? I also have a few questions.

The TRD Off Road is cut out correct so whatever color the truck is is what would show through?

They come with a template for install?

Any actual pictures of the wide vs narrow for comparison?

mcmnos4r2 · May 2, 2018

@SoulArmored
If you pm me your email , shipping address and the decal size with or without the logo i will send you an invoice. There are no templates for mounting, the decal pretty much is its own template. Yes the logo is cut out and shows the color of the truck.

mcmnos4r2 · May 2, 2018

KMorris45 · May 2, 2018

mcmnos4r2[OP] said: ↑

Click to expand...

Which size is the one shown in these pictures?

mcmnos4r2 · May 3, 2018

The white taco has the medium size. Fits Inside the raised areas of the hood and tgr length goes to the end of the raised areas. The long version extends a little further to about 3.5'' from the front of the hood
The sand truck is the extra wide size which is one length.

Spider171 · May 3, 2018

SgtPuddin said: ↑

Would it be possible to cut this decal to match the hood?

Click to expand...

I'm interested in that, is it vinyl? Also thinking red inserts on cement grey.

KMorris45 · May 3, 2018

I'm thinking I want to do the 3rd Gen Extra Wide with logo but I'm worried about that whole heat gun/vinyl experience recommendation for installation. Don't want to get it and jack it up as I don't have either of those things

Spider171 · May 3, 2018

I think that looks cool as well, I know a couple people so installation might cost me a six pack!

ScorpioVI · May 3, 2018

Anybody have pics of the stripes on the truck?

Spider171 · May 3, 2018

mcmnos4r2[OP] said: ↑

The white taco has the medium size. Fits Inside the raised areas of the hood and tgr length goes to the end of the raised areas. The long version extends a little further to about 3.5'' from the front of the hood
The sand truck is the extra wide size which is one length.
Click to expand...

Wow, I thought that it was the same truck, glad to hear it's 2 different trucks, I thought the angle was really playing tricks with my eyes. I am thinking the wide one will do!

Spider171 · May 3, 2018

Really would love to see daylight pictures for the way it covers the ridges on the hood.

urchim · Jun 13, 2018

remgu2000 said: ↑

Edit: Sorry I posted this in the wrong thread. Same vendor, different product. I've copied the post to here.

---------------------------

Thanks @mcmnos4r2

Just added your XL version with "TRD Off Road" on it. I'm not completely centered at the bottom but it's darn close. I'm super happy!

Tips:

-Have someone help you. Don't try it alone unless you are a professional. My wife held the decal while I peeled off the paper from the adhesive side. She then helped me place it on the hood. She then helped me try to center it. Lastly she helped squeegee it. So yeah a second set of hands is a must.

-Rapid Tac Fluid Film worked great. It's very forgiving when moving the decal around.

-Get something good to use as a squeegee. I used reusable plastic spreaders of the kind meant to use on fiberglass installations.

-Don't apply directly under the sun because the vinyl gets hot and stretches. I parked in my garage a little so as to be in the shade.

-When peeling off the paper on the adhesive side be careful with the center of the "O" as they can come off easily.

- Mine is not exactly centered. Next time I will cut the paper as close to the vinyl's rounded edges as possible so that I can see with more precision where the rounded bottoms of the decal are going to end up.

All in all not bad for a first time install of a larger decal.

Click to expand...

of topic but what tire you run and size?

Truck looks bad ass

remgu2000 · Jun 14, 2018

urchim said: ↑

of topic but what tire you run and size?

Truck looks bad ass
Click to expand...

Thanks. Nitto Ridge Grapplers (285/70/17) on 17" TRD Pro wheels, 1.25" Spidertrax spacers black, and black Gorilla lug nuts.

Rmontem · Jun 15, 2018

I'm interested in the extra wide version of the hood wrap. Brings a great look to the truck .

Log in or Sign up

Welcome to Tacoma World!

3RD GENERATION MATTE BLACK TACOMA HOOD STRIPES

#21
SgtPuddin Well-Known Member

#22
Bigdaddy4760 Well traveled Older Than Dirt

#23
NIU_Huskies Well-Known Member

#24
mcmnos4r2 [OP] RLM sign group

#25
SgtPuddin Well-Known Member

#26
mcmnos4r2 [OP] RLM sign group

#27
SoulArmored Well-Known Member

#28
mcmnos4r2 [OP] RLM sign group

#29
mcmnos4r2 [OP] RLM sign group

#30
KMorris45 Well-Known Member

#31
mcmnos4r2 [OP] RLM sign group

#32
Spider171 Well-Known Member

#33
KMorris45 Well-Known Member

#34
Spider171 Well-Known Member

#35
ScorpioVI IG: @scorpiovi.ig

#36
Spider171 Well-Known Member

#37
Spider171 Well-Known Member

#38
urchim Well-Known Member

#39
remgu2000 Keepin' on keepin' on.

#40
Rmontem New Member

Products Discussed in

Log in or Sign up

Useful Searches

Welcome to Tacoma World!

3RD GENERATION MATTE BLACK TACOMA HOOD STRIPES

#21 SgtPuddin Well-Known Member

#22 Bigdaddy4760 Well traveled Older Than Dirt

#23 NIU_Huskies Well-Known Member

#24 mcmnos4r2 [OP] RLM sign group

#25 SgtPuddin Well-Known Member

#26 mcmnos4r2 [OP] RLM sign group

#27 SoulArmored Well-Known Member

#28 mcmnos4r2 [OP] RLM sign group

#29 mcmnos4r2 [OP] RLM sign group

#30 KMorris45 Well-Known Member

#31 mcmnos4r2 [OP] RLM sign group

#32 Spider171 Well-Known Member

#33 KMorris45 Well-Known Member

#34 Spider171 Well-Known Member

#35 ScorpioVI IG: @scorpiovi.ig

#36 Spider171 Well-Known Member

#37 Spider171 Well-Known Member

#38 urchim Well-Known Member

#39 remgu2000 Keepin' on keepin' on.

#40 Rmontem New Member

Products Discussed in Entire Site Forum: 3rd Gen Tacoma Parts Marketplace (2016-2023)

#21
SgtPuddin Well-Known Member

#22
Bigdaddy4760 Well traveled Older Than Dirt

#23
NIU_Huskies Well-Known Member

#24
mcmnos4r2 [OP] RLM sign group

#25
SgtPuddin Well-Known Member

#26
mcmnos4r2 [OP] RLM sign group

#27
SoulArmored Well-Known Member

#28
mcmnos4r2 [OP] RLM sign group

#29
mcmnos4r2 [OP] RLM sign group

#30
KMorris45 Well-Known Member

#31
mcmnos4r2 [OP] RLM sign group

#32
Spider171 Well-Known Member

#33
KMorris45 Well-Known Member

#34
Spider171 Well-Known Member

#35
ScorpioVI IG: @scorpiovi.ig

#36
Spider171 Well-Known Member

#37
Spider171 Well-Known Member

#38
urchim Well-Known Member

#39
remgu2000 Keepin' on keepin' on.

#40
Rmontem New Member

Products Discussed in