4Runner fogs on a 1st gen Tacoma

How did you get rid of the hyper-blink? I gave up hope. I tried almost everything and still no luvk... What bulb did you use in place of the old dtrl??

 

I pretty much just followed this http://www.4x4wire.com/toyota/tech/tacoma_turn_signal/

You are gonna have to get that new socket and 1157 bulb and dremel the hole bigger in the light

The only thing i did different was tap off of the green wire for the side markers and connected it to where the turn signals were before to get the fog light look.

 

man, that looks awesome, can you throw together a how to thread...

 

Ill try to throw something together, i really used that link for just about eveything. Give me a little bit

 

As for the Fast Blink situation, I came across this a couple years ago with my Wrangler when switching to LED blinkers all around. My old haunting grounds "JEEPFORUM.COM" had two solutions.

1- Found on Stu Offroad.com involves opening the blinker relay and cutting a connection on the biscuit board.
http://www.stu-offroad.com/electrical/led1/led-3.htm

2- The solution I used was to bend one of the blades on the relay out of the way and jamming it back in.....that is the route I used although I do not recall which one.

I know that this was for a Jeep and we are talkin Yota's but relays are pretty much relays and don't vary that much in design and function.

 

Can anyonw help with getting this done with the fog light thing. I would love to do this to my vehicle.

 

So the "fog lights" come on with the parking lights?

 

I ended up getting a bigger bulb last night at Auto Zone. Instead of the recommended 194 I bumped it up to an amber 921 made by Silvania. It fits in the standard socket with ZERO trimming around the housing and it COMPLETELY got rid of my hyper blink! I could not be happier!

 

hi guys i did the same thing on my 2002 tacoma wat you have to do is go to auto parts and buy and led flash which cost around 11 bucks with tax included . then you climp it into the new signal cables and problem solve i will post some pictures of mine by tomorrow with step by steps