4Runner tweeter in tacoma

Anybody put these in there truck

 

Yep, I did when I first got my truck back in ‘14. It takes a bit of shaving of some plastic on the inside but I’ve had them for almost six years without a problem.

 

Got any pics I would like to see how they came out

 

I would say you're better served going with aftermarket components, rather than trying to get an oem speaker to fit. If you're going to have to modify, you might as well do the same amount of work and end up with a far superior result.

Even cheap aftermarket speakers are better than these ~20 year old oem tin-foil tweeters and paper cone woofers.

You can either get a set of component speakers (separate tweeters), or a set of 2-way speakers and forget the OEM tweeter location.

 

I got a set of sail panels for sell if you decide To go with mod .

 

You got a pic

 

I got a set of these used on here (with the tweeters in them), but the "ball stud" on the plastic doesn't line up with the hole/clip on my door, it's about an inch off. I heard that later trucks might have it where it lines up (I have 2x 99's, both were in wrong spot). I put component tweeters on the door and it is fine but the tweeter pods are slick too. My plan was going to put my component tweeters behind the sail panels.
Incidentally I have a set of the sail panels for sale LOL.

 

here you go

 

My tweeters were too big to fit so I had to cut out a bigger hole with a Dremel.

 

I put these in probably 15 years ago, they fit perfectly with a little shaving, the speaker set up I used is a component speaker set up, so the Twitter goes up at the top and the other speaker goes in the door

 

Component speaker info
https://www.crutchfield.com/S-AbyekEWEsEQ/learn/what-are-component-car-speakers.html