50+ thread

I like trips...

 

Gives me hours of carb tuning fun!

 

Ahh ok.
Bet you have an engine under there right ???? Tee hee.... Lol

 

Hours really??
For us not more than a couple of min..

 

$100 for me to lift the hood if you want to play

Also I don't want to use a stock hood , those weigh 65lbs and my fiberglass hood weighs 18lbs

 

nice idea but if I did that I wouldn't be able to see shit. VA also has a hood scoop height law which dictates no higher than 2 1/4" for that year

 

Tom's Burgers Waco
http://tomsburgerswaco.com/


I'm so hungry.
I'd like to hit this otw home but I know it'll kill me.

 

Well, they are 3 Webers. The beauty of them is that there are a lot of adjustments to fine tune it. The downside is that there are a lot of adjustments to screw it all up. Wideband made the job exponentially easier. It's an Offenhauser progressive set up. The right look would have been 3 glass bowl Holleys but good ones aren't that easy to find and the gaskets for the glass bowls don't seem to hold up with ethanol. That's one bad place for a leak!

 

Calif has no vehicle inspections and pre 1976 you can do what ever you want to them as no smog cert is required . you can basically have a Pro Mod on the street and they won't hassle you

My last hood was 12" tall , never had any problems with law enforcement

I've got a friend with a 65 Ford Mustang drag car with a 8-71 blown mechanically injected 460 . He's running around on 31x18.50 slicks and M&H racemaster front runner drag tires up front . Never been hassled by law enforcement

 

No sir.
I drive to get state truck.
All drive time on clock and they're supposed to supply tools.

 

Lenox HSF120 12" PVC/ABS Hand Saw - Handsaws - Amazon.com

$35 LENOX Hand Saw, 12", PVC Blade & handle,TPI:

https://www.amazon.com/Lenox-HSF120...&qid=1485996698&sr=8-5&keywords=lenox+pvc+saw



Here's my cordless sawzall

 

We run webers too. The only thing that can stand up to the stress. Glass Bowl Holley's are way cool....

 

That's slick 3 2 barrels ??:}

Cypher

 

Why's it gotta be 4' deep?

 

3 Aces (single barrels) - built 200 Ford. For what's in it, I could have bought a 347 stroker for a bit less. It's funny sitting at the car shows. People walk by and they get almost all the way past and then back up wondering what the heck I did...

 

Keep the water from turning to steam in the summer heat

Have to stay below the frost line...

 

Most of the time once you set up a set of webers you usually don't muck with them after.

 

That's the great thing about Rodding , it takes all kinds