5100 settings: 2.5" or 1.75"?

So what will 1.75 in the front and a 5th AAL in the rear look like?

 

Before. 35 inches from ground to bottom of wheel well:

 

After. 37 inches from ground to bottom of wheel well:

 

My Fathers Day present was also delivered last night so I am extra excited!!!

 

open it up!
put it in!
make a thread!

 

So you went from 35 to 37 in what setting did you go with the 1.75?

 

I set them at 1.75. I went with that because of the possibility of alignment issues & I also decided not to get an add-a-leaf. Also, that 37 measurement was immediately after install, so they have probably settled somewhat in the last 7 months.

 

So whats the verdict on ride quality? And that was billy 5100 at 1.75 up front only with stock coils n uca right?

 

They are infinitely better than the stock sr5 shocks. I added the rears recently because the fronts were so good. This was probably the most noticeable improvement behind moving from the dunflops to duratracs.

 

Sounds good man. Dont know if i missed it but ur running the stock coils right?

 

Are those 275/70/17 or 265/70/17?

 

The suspension is totally stock except the shocks & spidertrax. I am installing a Hellwig swaybar later today, though.

Tires are 265x75x16, which is largest at stock height. I had minimal rubbing until I got rid of the mud flaps.

 

I guess it is time to do a build thread.

 

Do it!