1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

885/884 - help me choose

Discussion in 'Colorado' started by crolison, Feb 22, 2016.

  1. Feb 22, 2016 at 8:20 AM
    #1
    crolison

    crolison [OP] Well-Known Member

    Joined:
    May 17, 2011
    Member:
    #56801
    Messages:
    3,157
    Gender:
    Male
    First Name:
    Chris
    Ar vah da, CO
    Vehicle:
    POS
    I have been doing research and trying to get more opinions on an old man emu set up and need for UCA.

    So I have a 2006 dcsb, 4wd. Offroad rear bumper (swing outs), tools in the bed, and a topper. So for the rear I got Dakar springs and figure with the weight should be around 2.5" rear lift.

    For the front I have rci steel skid and sliders. Eventually I want to get an arb bumper.

    I have new 5100s set at 0 and used 885x (believe 30-40k miles) and was hoping to get 1.5-1.75" of lift when I get the front bumper.

    Wondering if the higher lift in the rear and the weight and future weight of the truck I'll be able to get it aligned properly. It seems to be hit or miss with these trucks and lifting and aligning.
     
  2. Feb 22, 2016 at 11:09 AM
    #2
    teamhypoxia

    teamhypoxia MichelinMan

    Joined:
    Aug 21, 2012
    Member:
    #85247
    Messages:
    9,603
    Gender:
    Male
    Colorado
    Vehicle:
    '12 DCSB TRD OR
    If/when you get a front bumper/winch, you're going to want 886x
     

Products Discussed in

To Top