'96 taco Eibach Billy question

Hi guys;
I have a '96 Toyota 4x4 xtra cab 2.7 4cyl 5spd.

The fromt suspension has Bilstien shocks with threaded bodies(0" to 3") inside Eibach silver coils.The truck is stock with no heavy bumper or winch.
I would like to get some specs on the Eibach coils that are on my truck.
The numbers are;
275596
1400.250.0550.0S
The only info I can get from the numbers is they measure 14" and are rated at 550Lbs.
Does anybody have this setup.Apparently it's an Allpro item.I've contacted them twice but no response.
My question is;

If the Bilstien shocks are set at 0" how much lift,over stock, do these coils provide ?
Thanx for your time and great sight.

 

Eibach coils clain a 3'' lift but a lot of ppl tend to get 3.5-3.25.

Strange that is an Allpro item tho and that they are only 550lb.

Eibachs are rated 650lb.

You are also NEVER suppose to have the Billys set to anthing but 0!

 

the eibachs for our trucks are now toytec and are 620.

edit: about 3 inches, we got about that I think

another edit: here's the part number 112620

 

Ya,I thought they were a little light at 550 especially when stock replacements are rated at 660 drivers side and 465 pass. side (Napa).

JBLAIR---are those V6 trucks ?

 

Here is a link to toyotecs

 

nope, we have the same truck you have except it's a 99. 2.7 ext. cab 5 spd. I had no idea stock replacements were 660 and 465!

I'll get a pic as soon as I can

 

Just installed the Eibach/5100 combo. It gave me just over 3" of lift on the 0 setting.

 

how does it ride? im getting bilsteins and either ome coils (whick only give a 2.5 inch lift) or the eibachs,

 

The ride is 10000x better than stock! Get the Eibachs, they give you 3" and they are cheap!

 

alright preciate it man, im gonna order em wednesday i wish wheeleroffroad had em

 

JR97Tacoma;
what are you runnin for rear suspension ?

 

I have ome 881 on mine which gives 2.5 of lifts only. i wanted 3 so i can put on 33's later on the future. mine is also a 4cyc also. i can go with 1/2 spacers on top of my 881 too, but i don't wnat to run 1/2 spacers to get the 3''.

 

how's your cv axles handling? any replacements yet?

 

Just stock springs and some 3" blocks. Those are the next things to go.

Ill be putting a 5 leaf pack and some 1" or 2" shackles to get the 3" i want.

CV axles have been fine so far. No replacements.

I put the diff drop in also.