1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

96 Toyota Tacoma 4x4 Clutch

Discussion in '1st Gen. Tacomas (1995-2004)' started by toyotaguy38, Jul 18, 2010.

  1. Jul 18, 2010 at 5:02 PM

    toyotaguy38 [OP] New Member

    Jul 18, 2010
    First Name:
    96 Toyota Tacoma 2.7 4x4
    What is a good clutch and presure plate for a 96 toyota Tacoma 4x4 with a 2.7 with 31 10.50 15 . It mostly is road driven, But I do hunt and I do go off road, I also have been known to pull trailers.

    I just got my clutch replaced 4 years ago and it is already going out again.

    Thanks Steve:confused:
  2. Jul 20, 2010 at 8:36 AM

    350TacoZilla Well-Known Member

    Sep 22, 2007
    Clear Spring MD
    2.7L 3RZ,K&N filter, 4" deck plate mod,flowmaster 40 series,3" body lift,3" suspension lift,35's. I also have another tacoma a 97 with a 350 small block in it on a 1972 blazer frame...
    learn to drive, JK lol I have always had good luck with stock toyota clutches. They cost bit more than a parts counter one but I have seen stock clutches at 150K just starting to slip.

    I have also used the advance auto parts HD lifetime clutch and it worked fine for the 2 years I had it in the truck afterwards, but then I stuck a V8 in it with different tranny so its not like it wore out in those 2 years just got replaced
To Top