AAL and block

Alright, I DID use the search function and after about 30 seconds of looking I didn't find results. So, here's the deal. I have already installed wheelers progressive AAL in the rear along with 5100's and I have recently become the proud new owner of a RTT. So now with the tent loaded and without the rest of my gear, the rear has a slight sag. Now with the recent purchase of the tent, bed bars, and sliders I am lean on funds for the dakars at this moment in time. I will eventually get these. But for now what do the Tacoma wise men think of adding a 1"-1.5" block to the rear and what are others' experience with this setup? All feedback is greatly appreciated.

 

I mean that's what id do...

 

I'd reinstall the overload leaf if you removed it. That will give another half inch.

Also, wheelersoffroad sells half inch steel shims for the leaf packs. Bolt into the leaf packs unlike blocks.

Good luck with whatever you decide.

 

That small of a block won't hurt anything