AAL and other question.

Hello, I have a few questions before I purchase some items, and I would also like to check availability of a few other things.

I ordered the TRD pro suspension kit, and am expecting to get 1.75” up front, and would like to do an AAL with Ol left in to get 2” or so in the rear.

I’m about to purchase an AAL (3 leaf pack) for my 2015 DCLB, will the factory bump stops be sufficient with this system?

Also, if I keep the OL in, will I run into issues with stretched brake lines?

The pro kit does not come with new upper shock bushings, but I’m almost certain they’re the same bushings that come in the 6112/5160 setups, is there any way I can purchase the bushings from you?

Thank you
Jared

 

We do not offer factory replacement parts such as the Pro suspension. Most factory rear shocks are stock replacement height and do not accommodate rear lift. I would suggest to find out the exact extended and collapsed lengths of the rear shocks to make sure that they would be able to accommodate the addition of the add-a-leaf. This way you can make sure with 100% certainty that they will do so without limiting the rear end and without potentially causing damage to the shock itself.

Since this suspension is a stock replacement it is again limited so brake lines and bump stops would not be needed but again it is best to know the exact numbers of the shocks themselves to be sure.

We do not sell bushings separately for this suspension since the 6112's come with them. I would suggest going back to whomever you bought them from or the dealership for these replacement parts.