ABS and Traction lights came on

I just installed the Rough country 3” lift with the premium front struts this weekend. And sadly I now have a abnormal noise in the front suspension. Could be tire related being that I have not had a alignment as of yet. Also my ABS and traction control lights are coming on with an error message in the multi info display saying Anti-lock braking system malfunction. I did have to disconnect the ABS wire going into the steering knuckle because the wire was pulling tight. Any and all feedback or info would greatly be appreciated.

 

@Ayeele this problem sounds similar to yours

 

I installed the same lift without issues

 

For the lights, its your sensor. I ripped mine out and everything came on. Paid 500 to have to fixed. As from the noise, its probably your needle bearings. Put it in 4x4 and see if it goes away

 

Change you’re thread title to something that is more pertaining to your problem. Help, please help, titles are reserved for people who are stuck or in an accident somewhere. Go to thread tools->edit title. And welcome to TW

 

Ditto please change the title

 

Try disconnecting your battery, let it sit for 15 minutes, reconnect the battery, check if the error messages go away.

 

Should change the title of your thread to something more relevant. “Help” threads are generally reserved for people who truly need help like being stuck on a trail somewhere.

 

Search ECGS bushing for the noise.

Check your front ABS lines for stretching for the traction code.