ABS kill switch mod 05 2wd

I've been looking around on TW and TN trying to find a write up on how to install a kill switch for my ABS, it sucks off roading and can get me into some trouble. Does anyone have a link or a write up so i can figure this thing out???

thanks guys!

any input is appreciated!

 

Here you go.
http://www.tacomaworld.com/forum/2nd-gen-tacomas/4838-cheap-free-mods-3.html#post45912

 

Thanks for the link to the write up!

well guys i completed the ABS kill switch mod, i ran into a problem tho.. i followed the write up, and everytime i'd flip the switch on i'd blow my #31 (in dash) 10AMP fuse, no matter what.. and the check engine light would pop on and the rear diff along with the ABS and P. Brake (expected) so i put in a 30AMP fuse and problem solved, no lights are on except the ABS when i flip the switch to on!!!

ill post some pix up tomorrow after i get off work.

 

neat! I wanna do this one.. i think i'm gonna try and get it done before our trip on the 27th

 

well putting a 30amp fuse in where a 10amp should be sure sounds like a bad idea... i don't even know what that fuse does.... but i ran into the same exact problem and might throw a bigger fuse in. makes me uneasy though..

 

does it work for 2wd prerunner sport?