AC60F swap into 3rd gen with AC60E

Anyone ventured down this path? Going with a 1ton swap but trying to wait on the LS swap till i’ve got my use of the stock motor being it only has 60k. Is the AC60F possible to swap in with no problems? I know it’s the same as the AC6E besides the tail housing.. not sure if I would run into any wiring issues or anything in that manner

 

Your question is likely too technical for this channel. You might have better luck in the technical chat channel.

https://www.tacomaworld.com/forums/technical-chat.10/

 

I got curious so I did an internet search and found this thread.

https://www.tacomaworld.com/threads/ac60f-transmission-2018-taco.780088/

It doesn’t answer your question, but has some info and some contacts.

 

@gearcruncher Sir, are there any electrical differences between the AC60E and AC60F? I know mechanically they are the same with the only difference of the tail end(to accommodate for a transfer case) and shaft portion. Asking for a friend trying to perform a conversion like I did on my 2g. Thanks!