Add an amp T-harness for 2nd gen

I’m adding a Kicker key amp to 2015 non-JBL system. Anyone know which T-harness will work with the stock speaker wiring harness? I’ve looked at the red wolf but it is listed for the 18-22 years. I’m using RCA’s for the input to the amp and will use the new t-harness for the output to speakers.

 

Thankfully a few years ago, PAC started making this

https://www.crutchfield.com/S-DleIT...-LPHTY01-LocPro-Advanced-T-Harness.html?gQT=2


You’ll need to splice the key’s input side of the harness (keep the RCA’s attached) but that’s super easy

 

Thank you for the reply Destin, I should be more specific. I am using the new Joying 9” for my head unit. It has the RCA outputs for each channel input to the Key amp. I just need a harness that I can spice to make an harness that will attach to the stock speaker wires to the output side of the amp. Just so I don’t have to cut the stock wiring. I’ve found this one

$14 RED WOLF Car Radio Add Amplifier Subwoofer T-Harness Adapter Connector Compatible with Toyota 2018-2023 Camry, 2019-2023 Tacoma RAV4 Corolla Non JBL System Plug and Play

https://www.amazon.com/dp/B09DTY8PMD?ref=ppx_yo2ov_dt_b_product_details

however, I don’t know if that specific one is compatible with the 2015.

 

Gotcha!

you actually don’t really need to purchase anything additional

you can simply cut the 8 speaker wires on the aftermarket radio harness and splice the key speaker outputs to it

this one

 

Because you already have an aftermarket radio, I would grab a power wire kit though.

Scosche ICAK12 is a good option for it

 

lol, I’m an idiot! That’ll work perfect. For sure on the fused power wire and a good ground.

 

Not an idiot, just not something you’re supposed to know off the top of your head!

 

I appreciate your help!