Advice - remote start install

I want to install a remote start on my 2018 TRD Sport. I have seen a couple of videos on the installation and installing the units seems pretty straightforward. My question is in regard to removing that lower section of the dash. After removing the 3 screws/bolts do I pull straight out? Out and down? Don't want to break any of the plastic fasteners.
Thanks

 

Yeah pull straight towards you bunch of push clips around the air bag and left and right of steering column

 

Thanks, I will try that.

 

Start at the right side by your ignition and pull forward, then left side by cubby and if ts not all out by then, below by airbag. Total of 5 screws to remove beforehand, 2 behind steering wheel, two below knee airbag, and 10mm hex after popping/peeling back the drivers side rocker (next to driver's left ankle. then let the trim sort've dangle, no need to completely disconnect connectors.

We have videos on our website.