1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

AFE Dry Filter Question

Discussion in '2nd Gen. Tacomas (2005-2015)' started by PMK, Feb 10, 2013.

  1. Feb 10, 2013 at 8:05 AM
    #1
    PMK

    PMK [OP] Well-Known Member

    Joined:
    Feb 27, 2010
    Member:
    #32186
    Messages:
    1,366
    Gender:
    Male
    Florida
    Vehicle:
    10 DCLB TRD Sport
    White, debadged, Mudflaps removed, ICON 2.5 in front, 2.0 in rear, all 4 corners have reservoirs, Spidertrax wheel spacers all around, BAMF bolt on sliders, Avid lightbar, oem transmission cooler converted to power steering cooler, aftermarket transmission cooler eliminating all oem transmission cooler stuff, remote mounted spin on transmission fluid filter TrueTrac rear differential, rear diff housing vented and filtered into left side bed box, URD MAF calibrator, Volant intake scoop into oem airbox, second filter removed, airbox internals smoothed, blended and polished throttle body, NST intake manifold spacer, Wet Okolee set covers, WeatherTech Digital Fit mats, inexpensive JVC single DIN, Scangage, AVS Stepshield door sill protectors, Doug Thorley Long Tube Headers, URD Y pipe with O2 sims.
    I have in hand what is supposed to be a Drop In AFE Pro Dry S.

    The AFE Dry filter is Part Number 31-10114

    The AFE Pro 5R oiled filter is Part Number 30-10114.

    The molded rubber flange on what is supposed to be a dry filter has the wet filter part number molded into it.

    Here 's where I ask for help. Could someone with a known dry filter see what the rubber molded flange Part Number is.

    Thanks
    PK
     

Products Discussed in

To Top