1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Aftermarket Transmission cooler

Discussion in '2nd Gen. Tacomas (2005-2015)' started by Johnny_knox69, Aug 7, 2008.

  1. Aug 7, 2008 at 4:54 PM
    #1
    Johnny_knox69

    Johnny_knox69 [OP] Well-Known Member

    Joined:
    Apr 4, 2008
    Member:
    #5743
    Messages:
    88
    I am installing an aftermarket Trans Cooler......Any know what line goes into the trany and what ones comes out?
     
  2. Aug 7, 2008 at 5:14 PM
    #2
    chris4x4

    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    106,192
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2013 Rubicon Unlimited,
    4.10 gears, sliders, and lots of buttons.
    It shouldnt make a difference which goes in or out, as long as the cooler is installed inbetween.
     
  3. Aug 7, 2008 at 6:15 PM
    #3
    Johnny_knox69

    Johnny_knox69 [OP] Well-Known Member

    Joined:
    Apr 4, 2008
    Member:
    #5743
    Messages:
    88
    Thanks Phantom, Exactly what I was looking for......In the mean time, I disconnected the line and found which one was going out!

    I will post some pics when I am done but this is a GREAT post from ToyNation....

    I searched everwhere but another site!! Thanks again...

    I am adding a Engin cooler and Trans Cooler....I tow often a 5000k trailer and like most of us like to add stuff to there toys!!!

    Thanks again for your help!

    Greg From WV
     
To Top