1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

all-pro offroad 2005+ plate bumper installation instructions

Discussion in '2nd Gen. Tacomas (2005-2015)' started by zero niner, Feb 11, 2009.

  1. Feb 11, 2009 at 8:12 PM
    #1
    zero niner

    zero niner [OP] romeo oscar bravo

    Joined:
    Aug 21, 2008
    Member:
    #8681
    Messages:
    527
    Gender:
    Male
    First Name:
    Rob
    Pacific Northwest
    Vehicle:
    09 DC SB Prerunner
    All Pro front plate bumper, 5100 1.75" Bilstein up front, 1" block and TSB in rear, UWS lowpro tool box, Toyota Side Steps
    Hello,

    Just got my new bumper from All-Pro this week, while researching I found that some people didn't get instructions with theirs. Mine came taped to the side of the box, I can see about scanning it if anyone needs them for an install.

    Haven't installed it yet, just thought I'd post up that I have the instructions...

    Rob

    *EDIT* Instructions for both Toyota Front Bumper Removal and All-Pro Plate Bumper are now attached below a few posts down...
     
    Dr. Jekyll likes this.
  2. Feb 11, 2009 at 8:27 PM
    #2
    Lentsnh

    Lentsnh Well-Known Member

    Joined:
    Nov 22, 2008
    Member:
    #10953
    Messages:
    9,547
    Gender:
    Male
    Vehicle:
    2007 Hummer H3 Tactical Edition
    None yet- Future: HIDs, Tinted tails, LED interior lights,
    Congrats man. Take lots of pictures!!! Yeah you might be able to make it a sticky
     
  3. Feb 11, 2009 at 8:31 PM
    #3
    paintdiddy

    paintdiddy Machine gun shits

    Joined:
    Oct 12, 2008
    Member:
    #9924
    Messages:
    10,307
    Gender:
    Male
    First Name:
    shithead
    nj and not from "the jersey shore"
    Vehicle:
    silver bullet
    nice...you lucky bastard.
     
  4. Feb 11, 2009 at 8:49 PM
    #4
    G-Sak

    G-Sak Well-Known Member

    Joined:
    Dec 8, 2008
    Member:
    #11372
    Messages:
    255
    Gender:
    Male
    PNW
    Vehicle:
    2005 TRD Offroad SR5 DC 6 speed
    FX-R Projector Retrofit with Apollo Shrouds, Digital HID 55 watt ballasts, D2S Philips 85122+ bulbs in the Winter and Digital HID 55w 5k bulbs in the summer, Bakflip G2, Pop N Lock, Tint, Grillcraft with PIAAs behind it, ScanguageII and a few audio/video upgrades.
    I look forward to seeing that bumper all mounted up niner. Hope the install goes well!
     
  5. Feb 11, 2009 at 9:10 PM
    #5
    Khaos

    Khaos Big Member

    Joined:
    Feb 4, 2008
    Member:
    #4570
    Messages:
    6,495
    Gender:
    Male
    First Name:
    Bryant
    Tallahassee FL
    Vehicle:
    2005 Prerunner TRD Off Road
    265/75/16 BFG A/T, 18" Magnaflow, K&N Intake Filter, Ultra-Gauge, Kobalt Toolbox, Metal Tail Light Guards, Cobra 19 and 4ft fiberglass antenna, Plasti dipped Badges/lower valance/rear bumper/grill/bullbar/ac controls, black DIN kit, JVC KD-X40, Wet Suit Seat Covers
    I don't need the instructions, but if you don't mind I certainly would take a look at those scans. I'm curious what the install is like.

    Get pics of the bumper! :)
     
  6. Feb 11, 2009 at 9:54 PM
    #6
    6shooter

    6shooter Well-Known Member

    Joined:
    Feb 1, 2009
    Member:
    #13201
    Messages:
    112
    Gender:
    Male
    portland, or
    Vehicle:
    06 sport........
    plenty.......
    i never got instructions. it's straight forward though.
     
  7. Feb 12, 2009 at 8:18 AM
    #7
    zero niner

    zero niner [OP] romeo oscar bravo

    Joined:
    Aug 21, 2008
    Member:
    #8681
    Messages:
    527
    Gender:
    Male
    First Name:
    Rob
    Pacific Northwest
    Vehicle:
    09 DC SB Prerunner
    All Pro front plate bumper, 5100 1.75" Bilstein up front, 1" block and TSB in rear, UWS lowpro tool box, Toyota Side Steps
    OK, I'll scan it at work today and attach to this thread tonight. I also have the Toyota bumper removal instructions (Longhorn Taco gets credit for this) which I'll add also to make this thread complete. Thanks folks!

    Rob
     
    Dr. Jekyll likes this.
  8. Feb 14, 2009 at 9:01 AM
    #8
    zero niner

    zero niner [OP] romeo oscar bravo

    Joined:
    Aug 21, 2008
    Member:
    #8681
    Messages:
    527
    Gender:
    Male
    First Name:
    Rob
    Pacific Northwest
    Vehicle:
    09 DC SB Prerunner
    All Pro front plate bumper, 5100 1.75" Bilstein up front, 1" block and TSB in rear, UWS lowpro tool box, Toyota Side Steps
    Hello folks!

    Instructions are now attached, the pics are not clear so I'll take my own when I install it this weekend and hopefully it will be clearer. Enjoy!

    I've also included the Toyota Instructions for removing the grill and stock bumper cover, thanks goes to Longhorn Taco who originally posted it.

    Rob
     

    Attached Files:

    Dr. Jekyll likes this.
  9. Feb 18, 2009 at 2:16 PM
    #9
    311offroad

    311offroad Stock Taco For Now

    Joined:
    Sep 11, 2008
    Member:
    #9161
    Messages:
    1,283
    Gender:
    Male
    Milledgeville, GA
    Vehicle:
    2005 TRD OffRoad SR5 4x4 Short Bed Debadged
    20% tint, Debadged, Pioneer AVIC-Z110BT, Infinity component door speakers, MagLite mod
    Bump! can't wait to see some pics
     
  10. Feb 18, 2009 at 2:48 PM
    #10
    Delmarva

    Delmarva Mayor of TW

    Joined:
    Oct 22, 2008
    Member:
    #10148
    Messages:
    35,854
    Gender:
    Male
    First Name:
    Mike
    Tucson, AZ
    Vehicle:
    12 Tundra TRDRW
    Nada, Zip, Zilch, Nothing
  11. Feb 18, 2009 at 3:54 PM
    #11
    zero niner

    zero niner [OP] romeo oscar bravo

    Joined:
    Aug 21, 2008
    Member:
    #8681
    Messages:
    527
    Gender:
    Male
    First Name:
    Rob
    Pacific Northwest
    Vehicle:
    09 DC SB Prerunner
    All Pro front plate bumper, 5100 1.75" Bilstein up front, 1" block and TSB in rear, UWS lowpro tool box, Toyota Side Steps
    Got it! But please don't be too cruel about the stock mini tires...

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  12. Feb 18, 2009 at 4:16 PM
    #12
    LonghornTaco

    LonghornTaco Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,355
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    Nice job! Can you take a picture of the underside, where those skid plate braces are? Looks like you left yours on...
     
  13. Feb 18, 2009 at 5:06 PM
    #13
    zero niner

    zero niner [OP] romeo oscar bravo

    Joined:
    Aug 21, 2008
    Member:
    #8681
    Messages:
    527
    Gender:
    Male
    First Name:
    Rob
    Pacific Northwest
    Vehicle:
    09 DC SB Prerunner
    All Pro front plate bumper, 5100 1.75" Bilstein up front, 1" block and TSB in rear, UWS lowpro tool box, Toyota Side Steps
    I'm on the fence about removing the braces, I don't want to completely have the bumper rubbing, what I'll probably do is pull the bumper and put it on above the flare portion (or lip) of the brace and put washer between the bumper and frame, we'll see. But here are the pics you requested.

    Rob

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  14. Feb 18, 2009 at 5:08 PM
    #14
    311offroad

    311offroad Stock Taco For Now

    Joined:
    Sep 11, 2008
    Member:
    #9161
    Messages:
    1,283
    Gender:
    Male
    Milledgeville, GA
    Vehicle:
    2005 TRD OffRoad SR5 4x4 Short Bed Debadged
    20% tint, Debadged, Pioneer AVIC-Z110BT, Infinity component door speakers, MagLite mod
    man thats a big gap for some sticks and stobs to get stuck up in!
     
  15. Feb 18, 2009 at 5:15 PM
    #15
    LonghornTaco

    LonghornTaco Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,355
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    Thanks for the pics zero! I think I'm gonna go down tonight and take a look at some adjustments... Doing a little wheelin this weekend and I can't have the bumper in 100% contact with my fender flare even when not flexed...
     
  16. Feb 18, 2009 at 5:45 PM
    #16
    zero niner

    zero niner [OP] romeo oscar bravo

    Joined:
    Aug 21, 2008
    Member:
    #8681
    Messages:
    527
    Gender:
    Male
    First Name:
    Rob
    Pacific Northwest
    Vehicle:
    09 DC SB Prerunner
    All Pro front plate bumper, 5100 1.75" Bilstein up front, 1" block and TSB in rear, UWS lowpro tool box, Toyota Side Steps
    So you removed the braces and have no skid plate right? I'll be interested to see your gap difference...

    Just make sure you have some washers handy too cause you may need it for adjusting the height. Let me know what happens with your adjustment and I'll update this thread when I remount my bumper.

    Rob
     
    Dr. Jekyll likes this.
  17. Feb 18, 2009 at 9:10 PM
    #17
    LonghornTaco

    LonghornTaco Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,355
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    I went to Home Depot and got a handful of washers... It's much better now, but one of the bottom bolts seems to be all jacked up now. Gonna grab a new one tomorrow.

    Here it was before:
    [​IMG]

    Now:
    [​IMG]

    Here's a pic of part of the scuffs from the bumper:
    [​IMG]

    Each side got 5 washers, lowered it a total of 5/16":
    [​IMG]

    Oh, and here is where the fender flare rubbed the top of the bumper. Kinda hard to see, but it's rubbed a little of the powder coat off the top of the bumper...
    [​IMG]
     
  18. Feb 18, 2009 at 10:36 PM
    #18
    zero niner

    zero niner [OP] romeo oscar bravo

    Joined:
    Aug 21, 2008
    Member:
    #8681
    Messages:
    527
    Gender:
    Male
    First Name:
    Rob
    Pacific Northwest
    Vehicle:
    09 DC SB Prerunner
    All Pro front plate bumper, 5100 1.75" Bilstein up front, 1" block and TSB in rear, UWS lowpro tool box, Toyota Side Steps
    LTC,

    You should still have those longer bolts from the hook on the passenger side. Those are longer so they won't strip like the shorter ones. Yes I striped on too. It just wasn't long enough. I should let All-Pro know about the height difference as mine wasn't a one-off. AP basically said with the bottom plate of the bumper touching the frame, there should be a 1/4" gap from the top of the bumper to the bottom of the headlights, just like your picture, but there needs to be adequate space, maybe they should add a spacer for those without a AP skid plate.

    Rob

     
    Dr. Jekyll likes this.
  19. Feb 18, 2009 at 10:41 PM
    #19
    LonghornTaco

    LonghornTaco Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,355
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    Thanks Rob! I saw those longer bolts from the tow hook sitting on my desk and thought about using them, then just forgot about them! I'll try them. But are they too long?

    Also, I talked to Terry at All Pro this morning about this when I ordered some more stuff and I sent these pictures to him. I'll be interested to know what his response will be. Of course, this is the same guy that said I wouldn't have to notch the pinch weld on my cab to bolt up the sliders either... They had "corrected" that issue. Well, I guess it uncorrected itself, because there's absolutely no way to get all four bolts per mounting plate on the frame without notching that pinch weld!

    Anyway, live to mod another day! :)
     
  20. Feb 19, 2009 at 6:42 AM
    #20
    longbow

    longbow I see you now..................

    Joined:
    Jun 26, 2008
    Member:
    #7586
    Messages:
    4,041
    Gender:
    Male
    First Name:
    Bill
    Indiana
    Vehicle:
    05 Tacoma Silver Mica TRD 4 Door
    Toy-tec Coil over lift, Eibach 700 lb springs, Sway bar relocate, Total Chaos UCA's, Moto metal wheels, BFG mudterrians, HID, custom 3 piece grill, Highlift jack w/custom mount, Highlift jack cover, bed matt, de-badged 100%, storage box lock mod, using defrost w/o AC mod, short antenna mod, horn re-locate, Tire Gate flat spare tire mount, engine cover painted, bed light (1) mod, wreck bar carrier, Blue Sea 5026 fuse block, center console outlet, flash light mod, Blue Sea inline fuse, Shrockworks sliders, All-Pro front bumper, Piaa 510 driving lights, Warn shackles front, Kennesaw rear bumper, "Tag Boltz" plate lights, Warn shackles rear, Warn M8000 winch, devil horns, BHLM, weathech liners front and rear.....T.W. sticker of course. Custom Sock bed decal for Michele
    Like all the info....I am gonna need it.
    Idea....instead of using all those washers, could you use a hard poly spacer of the right size (thinkness)??
     
To Top