1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

AM switch with original fog light harness

Discussion in 'Lighting' started by firetaco18, Apr 13, 2013.

  1. Apr 13, 2013 at 11:57 AM
    #1
    firetaco18

    firetaco18 [OP] Well-Known Member

    Joined:
    Jan 17, 2013
    Member:
    #95408
    Messages:
    473
    Gender:
    Male
    I have a '13 base with a wiring harness for fog lights. I put in the lights and a relay but I want to add an after market rocker switch that matches the others. The problem is that there are three prongs on the switch but four wires coming out of the harness. Has anyone added an AM switch to their stock wiring harness? I want to know what wires to hook up where or at least a link to know what each wire does.

    Thanks a lot, when its all done I plan on positing pictures.

    FYI for those who want to add fog lights, I used an after market set meant for a '07 camry and it fits like a glove.
     
  2. Apr 13, 2013 at 12:05 PM
    #2
    firetaco18

    firetaco18 [OP] Well-Known Member

    Joined:
    Jan 17, 2013
    Member:
    #95408
    Messages:
    473
    Gender:
    Male
    I believe I was able to answer my own question. There are four wires: green, green/white, blue, black/white. From what I found is:
    Green= switch illumination
    Green/white= ground for switch illumination
    Blue= power out to the lights
    black/white= ground

    Can anyone confirm this or know anything different?
     
To Top