Amazon Prime Day October 13 & 14, 2020-Post Up Those Deals!

If anyone sees a battery tender for motorcycles post that up

 

Yea I've had my

$100 NOCO GB40 : 1000A UltraSafe Jump Starter – 12V Lithium Battery Booster Pack, Portable Jump Box, Power Bank & Jumper Cables - for 6.0L Gas and 3.0L Diesel Engines

NOCO GB40 for over a year in my car. I've jumped 3 cars and 2 airplanes and it still had 75% battery when I charged it the other day.

 

This is tempting, I'm always snapping small bits:

$33 230 Pieces Titanium Twist Drill Bit Set, 135° Tip High Speed Steel, Size from 3/64" up to 1/2", Ideal Drilling in Wood/Cast Iron/Aluminum Alloy/Plastic/Fiberglass, with Hard Storage

https://www.amazon.com/Pieces-Titanium-Drill-Speed-Aluminum/dp/B07GGZQYM9/

 

https://www.amazon.com/deal/a850408c/ref=gbps_tit___a850408c?showVariations=true&smid=ATVPDKIKX0DER

35% off NOCO jump packs

 

Any of the NOCO ones work?

NOCO GENIUS1, 1-Amp Fully-Automatic Smart Charger, 6V And 12V Battery Charger, Battery Maintainer, And Battery Desulfator With Temperature Compensation

$30 NOCO GENIUS1: 1A 6V/12V Smart Battery Charger – Automatic Maintainer, Trickle Charger & Desulfator with Overcharge Protection & Temperature Compensation – For Lead-Acid & Lithium Batteries

https://www.amazon.com/dp/B07W46BX31/ref=cm_sw_r_cp_api_i_4uGHFb12H8XQQ

 

I'm sitting here talking myself in and out of this 1/2 impact

 

Heck yeah, I was hoping they'd go on sale. About to pull the trigger on a GB40.

@uhplifted I have the older version of this one, the G1100, and have had zero issues at all with it. Only annoying part is they use their x-connector instead of a standard SAE tender lead, but you can get an adapter for <$10

$30 NOCO GENIUS1: 1A 6V/12V Smart Battery Charger – Automatic Maintainer, Trickle Charger & Desulfator with Overcharge Protection & Temperature Compensation – For Lead-Acid & Lithium Batteries

https://www.amazon.com/NOCO-GENIUS1-Fully-Automatic-Temperature-Compensation/dp/B07W46BX31

 

Buy once, cry once

 

Full send. I paid $140 for my Ryobi and have love it.

 

Doing the same... My thing against it, is when tightening lug nuts, I still just use a breaker bar or long hand ratchet to "torque". So then it's good for only breaking bolts... I usually just use my 3/8 drive electric impact for the quick spin to remove lugs after breaking loose manually. I rarely ever use my air tools anymore.

 

Lots of wants, not a lot of needs.

 

I haven't used the pneumatic wrench since I purchased the (Ridgid 18V) battery one. Way more convenient and no noise of the compressor running. Plus, as someone else mentioned...easy to take on wheeling trips.

 

I may pick up a Genius 5 or 10. Two 5’s?

NOCO GENIUS10, 10-Amp Fully-Automatic Smart Charger, 6V And 12V Battery Charger, Battery Maintainer, And Battery Desulfator With Temperature Compensation

$100 NOCO GENIUS10: 10A 6V/12V Smart Battery Charger – Automatic Maintainer, Trickle Charger & Desulfator with Overcharge Protection & Temperature Compensation – For Lead-Acid & Lithium Batteries

https://www.amazon.com/dp/B07W3QT226/ref=cm_sw_r_cp_api_i_cDGHFb7NKWANQ

 

the no SAE thing may be annoying, I don't want an adapter, especially since I'll almost never need the tender except for maybe 2 weeks of the year lol

 

My adapter just lives on the end of my charger, honestly, never been a big deal for me:

$16 NOCO GC009 X-Connect SAE Adapter Accessory Genius Smart Battery Chargers

https://www.amazon.com/NOCO-GC009-SAE-Adapter/dp/B005DUMADC/

 

I'll use it to get them ready to be torqued.

1. Hand thread the lugnut on (so that you don't cross thread).
2. use the electric impact to tighten 1-2 hammers (basically stop when you hear it start hitting)
3. use torque wrench in cross-bolt fashion to torque to spec

done.

 

Nice thing about the 1/2" is that you can break them lose even with the wheel off the ground, no manual breaking. Greatly increases the speed. I'm spoiled now. Easy to spin them back on lightly then torque.

 

Gahhhhh, Dang you Amazon, i went ahead and got it.

 

Youll be happy. Remember how many times my cordless impact has saved us a ton of work on your truck on trails

 

Hahaha, that's pretty much why i grabbed it lol