Another fitment questions

Need new tires. Looking at the Falken Wilkdpeaks SL 285/70R17
here's my wheel and suspension set up:

Fox 2.5 Factory Series Coil-Over Reservoir (Front)
Fox 2.0 Performance Series IFP (Rear)
Method "Mesh" 17x8.5|6x5.50|0/4.75" wheels

Cutting required? Anyone have a similar setup that can give input?

Might just stick to 265/70R17's but the price difference for the 285's isn't much more so thought i'd look into it a bit

 

Some folks have gotten away with no rubbing however based on the fitment data, with a 0 offset and the 285's you will likely need to do the CMC to avoid rubbing.

Hopefully some other members can chime in and confirm what they are running.

 

Factory or aftermarket UCAs?

 

Factory