Another wheel question

Hi All,
My 2016 4X4 SR5 currently has these wheels on them:

https://www.hubcaphaven.com/p/23158/aly75190-toyota-tacoma-wheel-silver-painted-4261104150.html

I am thinking about throwing 245/75/16 or 265/75/16 KO2s on them.

Whichever I choose, I am thinking about replacing the wheel. I would prefer something a little darker. I was looking at these:

http://www.ultrawheel.com/wheel/8658/226-machine/?finish=2438&lugs=6

It is not clear to me exactly which offset and bolt pattern to choose.

How much can the offset differ from the 25mm on the OEM wheels? And which of the bolt patterns corresponds to the simple "5.5 inch" mentioned for the OEM wheels?

Can someone advise?

Thank you.

 

Plug in the wheel and tire specs in here to see the difference.

 

First, the ET number is the offset.

Check out this page to get the offset of your OEM wheel: Then enter the information of the OEM wheel and the information for the Aftermarket wheel in the will my tire fit calculator.

 

Thank you sir! So there is some difference ("inner rim which is 2.3mm further away from the suspension strut. The outer rim will poke out 27.7mm more than before"), but how much can be tolerated?

What about the question of bolts?

Thanks

 

This is a good calculator too

 

I have been playing with this. Are the 50mm fender, 30mm wheel well, 50 mm suspension and 0 mm scrub radius the 2016 Tacoma's specs?
Thanks.

 

No. you actually need to measure that and populate the selection accordingly.

 

Doing that accurately will be tricky.

 

I agree! I think you can get away with doing just the fender and wheel well clearance. and remember (if you are a firearms guy) 27.7mm is only 3 9mm bullets side by side.....

 

You do know how to speak my language...

 

I don't believe you will have any rubbing issues with those wheels and tires combination. I'm going 0 offset with 17x8 wheels and 265/70/17, which is the same night as the 265/75/16....