Anyone into R/C?

anyone wanna buy my 1/8th brushless system? 160a esc, 2650kv 6pole motor, programmer, and a 5000mah 30c 3s lipo. all for $150!

 

Pictures!?!?! U know the rules!!!!

Haahaahaahaa

 

here ya go lol


lipo is a 5000mah 30c 3s lipo








ESC SPECS
Turnigy 160A 1:8th Scale Sensorless ESC w/Fan


Specs.
Input Voltage: 3~5 Cell Lipoly
Operating Current: 120A (160A Peak)
LVC Cut-off: Autodetect (3.2v/Cell)
Over input voltage protection: Above 5S
Thermal Protection: 95deg C
Lost RX Protection: Yes, Delay 0.5sec
BEC: 6v, 3A
Dimensions: 54.9x47x36mm
Weight: 116g

Programming Options*
Battery Type: Auto, NiCD, NiMH
Operation Mode: Forward/Revers, Forward Only
Initial Brake: 10% ~ 80%
Drake Brake: 0% ~ 30%
Motor Timing: Low, Normal, High
Acceleration: Low Medium, High
Forward Limit: 0% ~ 90%
Reverse limit: 10% ~ 100%
Drive Frequency: 8Khz, 16Khz
Dead Band: 2, 3, 4, 5, 6
Rotation: Normal, Reverse

MOTOR SPECS
Specs:
Size: 40x68
Kv: 2560
Poles: 6
Max Amps: 120A
Max Volts: 21v
Max Watts: 2200w
Idle Current: 5.0A
Resistance (Ri): 5.8
Shaft size: 5mm

PROGRAMMER SPECS
Programming Options:
Battery Type: Auto, NiCD, NiMH
Operation Mode: Forward/Revers, Forward Only
Initial Brake: 10% ~ 80%
Drake Brake: 0% ~ 30%
Motor Timing: Low, Normal, High
Acceleration: Low Medium, High
Forward Limit: 0% ~ 90%
Reverse limit: 10% ~ 100%
Drive Frequency: 8Khz, 16Khz
Dead Band: 2, 3, 4, 5, 6
Rotation: Normal, Reverse

 

and a comparison of the motors
the one im selling is the bottom one

 

Haahaahaahaa

 

BUY IT! lol

 

And drop it in my slash for shits and giggles?!?!

 

i had it in a 2wd slash for shits and giggles lol

makes for some fun times haha

 

Lol

 

Held a G6 comp last weekend, 70+ entered
we each had to have a boat, you put it in the river, then race down 200' and pick it back up.






Had a few go fast trucks there, racing in the parking lot

 

thats a lot of crawlers lol. Looks like fun!

 

MJB, let that system over on RCTech, and it'll sell before dark, I'd guess. Sounds like a good deal to me.

 

Anyone have any ideas as to what I can fill my diff with that would be just a bit less "solid" than silly putty?

 

http://www.amainhobbies.com/product...ted-Silicone-Differential-Fluid-100000cst-2oz

they make 100k, 200k, and 300k diff oils

 

Just stripped a screw out really bad. The hex/allen kind. How the fuck do I get it out?!

 

cut a slice in the head and use a flat head screw driver

 

Got a dremel? You can cut a slot in the screw with a cutoff wheel and use a flat head to back it out.

 

I do gots a dremel!

 

Wear some safety glasses, those cut off wheels will fly all to hell on you.

 

x2