1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Mens Hiking Boots HAM radio for beginners Inflation problems Pls help me buy a camera and lens $100 --- what should i buy CB vs. Short Wave Which one is better and why?

Anyone into R/C?

Discussion in 'Sports, Hobbies & Interests' started by A.D., Feb 7, 2009.

Page 312 of 1086
  1. May 9, 2012 at 7:49 PM
    #6221
    t4daddy

    #6221
    t4daddy Well-Known Member

    Joined:
    Jun 16, 2010
    Member:
    #39041
    Messages:
    7,455
    Gender:
    Male
    North Alabama
    Vehicle:
    2008 PreRunner Double Cab
    It should be permanently bonded to the magnet, gonna call Tekin and see what's up, then will try to epoxy/JB Weld the magnet back to the shaft.
     
    t4daddy, May 9, 2012
    #6221
  2. May 9, 2012 at 7:57 PM
    #6222
    FearNothing321

    #6222
    FearNothing321 You gonna eat that taco?

    Joined:
    Jun 24, 2008
    Member:
    #7539
    Messages:
    7,294
    Gender:
    Male
    First Name:
    Tony
    Knoxville, TN
    Vehicle:
    2019 Audi S3
    Tekin should replace it, they supposedly have good customer service
     
    FearNothing321, May 9, 2012
    #6222
  3. May 9, 2012 at 8:06 PM
    #6223
    t4daddy

    #6223
    t4daddy Well-Known Member

    Joined:
    Jun 16, 2010
    Member:
    #39041
    Messages:
    7,455
    Gender:
    Male
    North Alabama
    Vehicle:
    2008 PreRunner Double Cab
    We'll see.
     
    t4daddy, May 9, 2012
    #6223
  4. May 9, 2012 at 8:15 PM
    #6224
    FearNothing321

    #6224
    FearNothing321 You gonna eat that taco?

    Joined:
    Jun 24, 2008
    Member:
    #7539
    Messages:
    7,294
    Gender:
    Male
    First Name:
    Tony
    Knoxville, TN
    Vehicle:
    2019 Audi S3
    FearNothing321, May 9, 2012
    #6224
  5. May 9, 2012 at 8:28 PM
    #6225
    t4daddy

    #6225
    t4daddy Well-Known Member

    Joined:
    Jun 16, 2010
    Member:
    #39041
    Messages:
    7,455
    Gender:
    Male
    North Alabama
    Vehicle:
    2008 PreRunner Double Cab
    Yes Sir, it is, the stainless shaft, (part the bearings ride in, and where you tighten the pinion to) is slipping inside the bigger silver part (sintered magnet). However, (embarrassed to admit this) not sure that's the same motor series I'm running?


    Seems I was correct, this is more like what I'm needing, the one you posted was for a SC type motor.

    http://www.amainhobbies.com/product.../218982/n/Tekin-185mm-T8-4030-Rotor-1-8-Buggy
     
    t4daddy, May 9, 2012
    #6225
  6. May 9, 2012 at 8:41 PM
    #6226
    FearNothing321

    #6226
    FearNothing321 You gonna eat that taco?

    Joined:
    Jun 24, 2008
    Member:
    #7539
    Messages:
    7,294
    Gender:
    Male
    First Name:
    Tony
    Knoxville, TN
    Vehicle:
    2019 Audi S3
    Hopefully you can get it all sorted out
     
    FearNothing321, May 9, 2012
    #6226
  7. May 9, 2012 at 8:44 PM
    #6227
    t4daddy

    #6227
    t4daddy Well-Known Member

    Joined:
    Jun 16, 2010
    Member:
    #39041
    Messages:
    7,455
    Gender:
    Male
    North Alabama
    Vehicle:
    2008 PreRunner Double Cab
    Thanks for the help, I'll get something going on, after I sell a pint of blood...
     
    t4daddy, May 9, 2012
    #6227
  8. May 9, 2012 at 8:52 PM
    #6228
    FearNothing321

    #6228
    FearNothing321 You gonna eat that taco?

    Joined:
    Jun 24, 2008
    Member:
    #7539
    Messages:
    7,294
    Gender:
    Male
    First Name:
    Tony
    Knoxville, TN
    Vehicle:
    2019 Audi S3
    no problem
     
    FearNothing321, May 9, 2012
    #6228
  9. May 9, 2012 at 8:58 PM
    #6229
    XDEEDUBBX

    #6229
    XDEEDUBBX Active Member

    Joined:
    Apr 12, 2012
    Member:
    #76806
    Messages:
    42
    Gender:
    Male
    First Name:
    Bryan
    Los Angeles
    Vehicle:
    96 Taco 4x4 v6
    K&N Filter, Custome Magnaflow Exhaust
    XDEEDUBBX, May 9, 2012
    #6229
  10. May 9, 2012 at 9:35 PM
    #6230
    littledvl

    #6230
    littledvl ride BMX!

    Joined:
    Oct 28, 2008
    Member:
    #10345
    Messages:
    3,642
    Gender:
    Male
    First Name:
    Eric
    Saint Leonard MD
    Vehicle:
    08 taco dc 4x4 / 15 tundra dc 4x4
    Too many to list
    Nice selection man! That rc18 is insane :eek:
     
    littledvl, May 9, 2012
    #6230
  11. May 9, 2012 at 9:54 PM
    #6231
    IDtrucks

    #6231
    IDtrucks Unhinged and Fluid

    Joined:
    Jun 2, 2010
    Member:
    #38254
    Messages:
    23,536
    Gender:
    Male
    First Name:
    Mark "Buck"
    Jackson Wyoming
    Vehicle:
    96' X-Cab 4x4 TRD Off Road Clusterfuck
    JVC Deck, 10" sub mountd in rear seat cubby, 2 LED off road lights mounted in grille, amber raptor style grille lights, LED rock lights, square led bed light, custom made fuse block tray, 12 blade Blue Sea fuse block, 100a marine circuit breaker, black plasti dipped full grille, tinted tail lights + third, Uniden 520 with 4' firestik, Bilstein 5100s with 620lb Eibach coils, Diff drop, Chevy 63 leaf swap, TG creeper joints, 14" triangulated biletein 5125s, 8" extended steel braided brake line, TG Rock Sliders, CBI Moab 1.0 front bumper, custom fabbed bed rack, full TRD E-Locker axle swap and matching re-gear with custom stand alone wiring circuit, 29 spline pinion flange from an 06 wishbone runner, tubbed for 35x12.5" general grabbers on Ultra type 181 wheels, crush sleeve eliminator, Mini ARB compressor, front ARB locker, garage fab aluminum front skid plate, custom built high clearence rear bumper, removable mothafuckin doors
    Here is my contribution to the R/C thread! It was in live yesturday...but its my helicopter i flew into a tree. Same day, i let my friend fly it and he had it for not 10 seconds and he flew it up into a ceiling fan and snapped a counter weight off the rotor, what a dip shit:mad:

    [​IMG]
     
    IDtrucks, May 9, 2012
    #6231
  12. May 9, 2012 at 10:23 PM
    #6232
    mjbtaco

    #6232
    mjbtaco low and slow

    Joined:
    Mar 21, 2008
    Member:
    #5423
    Messages:
    4,812
    Gender:
    Male
    First Name:
    Michael
    Montclair , so cal
    Vehicle:
    Turbo'd 95.5 extra cab and 2013 Silver DCSB TRD Sport
    PERFORMANCE Custom Turbo Setup FRONT SUSPENSION Drop Spindles by Aaron Carswell 01-04 Swaybar Endlinks Energy Suspension Endlink Bushings Cando Upper Control arms QA1 coilovers with 8" spring Custom 4 pot Brembo BBK Modified lower control arms with mjbfab qa1 mounting plates and Poly bushing sleeves REAR SUSPENSION Chasis Tech drop leafs QA1 adjustable shocks weld in drop notch Gas tank cross member bridge 3" angled blocks 2013 Double Cab Short Bed TRD Sport Eibach Pro Truck Shocks front and rear Lifted to the 3rd setting on the front shocks


    did you punch him? lol
     
    mjbtaco, May 9, 2012
    #6232
  13. May 9, 2012 at 10:35 PM
    #6233
    IDtrucks

    #6233
    IDtrucks Unhinged and Fluid

    Joined:
    Jun 2, 2010
    Member:
    #38254
    Messages:
    23,536
    Gender:
    Male
    First Name:
    Mark "Buck"
    Jackson Wyoming
    Vehicle:
    96' X-Cab 4x4 TRD Off Road Clusterfuck
    JVC Deck, 10" sub mountd in rear seat cubby, 2 LED off road lights mounted in grille, amber raptor style grille lights, LED rock lights, square led bed light, custom made fuse block tray, 12 blade Blue Sea fuse block, 100a marine circuit breaker, black plasti dipped full grille, tinted tail lights + third, Uniden 520 with 4' firestik, Bilstein 5100s with 620lb Eibach coils, Diff drop, Chevy 63 leaf swap, TG creeper joints, 14" triangulated biletein 5125s, 8" extended steel braided brake line, TG Rock Sliders, CBI Moab 1.0 front bumper, custom fabbed bed rack, full TRD E-Locker axle swap and matching re-gear with custom stand alone wiring circuit, 29 spline pinion flange from an 06 wishbone runner, tubbed for 35x12.5" general grabbers on Ultra type 181 wheels, crush sleeve eliminator, Mini ARB compressor, front ARB locker, garage fab aluminum front skid plate, custom built high clearence rear bumper, removable mothafuckin doors
    YES as a matter a fact! I was so mad in an utterly confused way that after me and my sorta GF can fly it for days that he destroys it in 10 seconds! He just punched the up stick and watched it as it flew RIGHT into the fan blades:frusty:
     
    IDtrucks, May 9, 2012
    #6233
  14. May 9, 2012 at 10:35 PM
    #6234
    mjbtaco

    #6234
    mjbtaco low and slow

    Joined:
    Mar 21, 2008
    Member:
    #5423
    Messages:
    4,812
    Gender:
    Male
    First Name:
    Michael
    Montclair , so cal
    Vehicle:
    Turbo'd 95.5 extra cab and 2013 Silver DCSB TRD Sport
    PERFORMANCE Custom Turbo Setup FRONT SUSPENSION Drop Spindles by Aaron Carswell 01-04 Swaybar Endlinks Energy Suspension Endlink Bushings Cando Upper Control arms QA1 coilovers with 8" spring Custom 4 pot Brembo BBK Modified lower control arms with mjbfab qa1 mounting plates and Poly bushing sleeves REAR SUSPENSION Chasis Tech drop leafs QA1 adjustable shocks weld in drop notch Gas tank cross member bridge 3" angled blocks 2013 Double Cab Short Bed TRD Sport Eibach Pro Truck Shocks front and rear Lifted to the 3rd setting on the front shocks
    that blows. now get a truck lol
     
    mjbtaco, May 9, 2012
    #6234
  15. May 9, 2012 at 10:56 PM
    #6235
    IDtrucks

    #6235
    IDtrucks Unhinged and Fluid

    Joined:
    Jun 2, 2010
    Member:
    #38254
    Messages:
    23,536
    Gender:
    Male
    First Name:
    Mark "Buck"
    Jackson Wyoming
    Vehicle:
    96' X-Cab 4x4 TRD Off Road Clusterfuck
    JVC Deck, 10" sub mountd in rear seat cubby, 2 LED off road lights mounted in grille, amber raptor style grille lights, LED rock lights, square led bed light, custom made fuse block tray, 12 blade Blue Sea fuse block, 100a marine circuit breaker, black plasti dipped full grille, tinted tail lights + third, Uniden 520 with 4' firestik, Bilstein 5100s with 620lb Eibach coils, Diff drop, Chevy 63 leaf swap, TG creeper joints, 14" triangulated biletein 5125s, 8" extended steel braided brake line, TG Rock Sliders, CBI Moab 1.0 front bumper, custom fabbed bed rack, full TRD E-Locker axle swap and matching re-gear with custom stand alone wiring circuit, 29 spline pinion flange from an 06 wishbone runner, tubbed for 35x12.5" general grabbers on Ultra type 181 wheels, crush sleeve eliminator, Mini ARB compressor, front ARB locker, garage fab aluminum front skid plate, custom built high clearence rear bumper, removable mothafuckin doors
    haha i want one, it would be fun! but i think the guy i know who sells em at the mall will fix it for free. i think im going to buy one of the scale model trucks that you build and im going to slam the thing! tons of guys on Idaho motor build the models, the only problem would e finding a good truck to build. they are pretty cool.
     
    IDtrucks, May 9, 2012
    #6235
  16. May 9, 2012 at 11:31 PM
    #6236
    mjbtaco

    #6236
    mjbtaco low and slow

    Joined:
    Mar 21, 2008
    Member:
    #5423
    Messages:
    4,812
    Gender:
    Male
    First Name:
    Michael
    Montclair , so cal
    Vehicle:
    Turbo'd 95.5 extra cab and 2013 Silver DCSB TRD Sport
    PERFORMANCE Custom Turbo Setup FRONT SUSPENSION Drop Spindles by Aaron Carswell 01-04 Swaybar Endlinks Energy Suspension Endlink Bushings Cando Upper Control arms QA1 coilovers with 8" spring Custom 4 pot Brembo BBK Modified lower control arms with mjbfab qa1 mounting plates and Poly bushing sleeves REAR SUSPENSION Chasis Tech drop leafs QA1 adjustable shocks weld in drop notch Gas tank cross member bridge 3" angled blocks 2013 Double Cab Short Bed TRD Sport Eibach Pro Truck Shocks front and rear Lifted to the 3rd setting on the front shocks
    yeah building em is about 80% of the fun lol since i hardly drive my rc's anymore i just mess with em now haha
     
    mjbtaco, May 9, 2012
    #6236
  17. May 10, 2012 at 3:20 AM
    #6237
    mjbtaco

    #6237
    mjbtaco low and slow

    Joined:
    Mar 21, 2008
    Member:
    #5423
    Messages:
    4,812
    Gender:
    Male
    First Name:
    Michael
    Montclair , so cal
    Vehicle:
    Turbo'd 95.5 extra cab and 2013 Silver DCSB TRD Sport
    PERFORMANCE Custom Turbo Setup FRONT SUSPENSION Drop Spindles by Aaron Carswell 01-04 Swaybar Endlinks Energy Suspension Endlink Bushings Cando Upper Control arms QA1 coilovers with 8" spring Custom 4 pot Brembo BBK Modified lower control arms with mjbfab qa1 mounting plates and Poly bushing sleeves REAR SUSPENSION Chasis Tech drop leafs QA1 adjustable shocks weld in drop notch Gas tank cross member bridge 3" angled blocks 2013 Double Cab Short Bed TRD Sport Eibach Pro Truck Shocks front and rear Lifted to the 3rd setting on the front shocks
    ehhh just ordered a bunch of stuff to build a 10th scale truggy. :)
     
    mjbtaco, May 10, 2012
    #6237
  18. May 10, 2012 at 3:32 AM
    #6238
    DanglingFury

    #6238
    DanglingFury Creeper

    Joined:
    Sep 21, 2010
    Member:
    #43614
    Messages:
    3,877
    First Name:
    Keith
    Bowling Green, KY/Lake Cumberland, KY
    Vehicle:
    2006 4Runner 4x4
    Daystar 2.5"/1" lift-level BFGoodrich KO2's
    I know I really like mine.

    I'll love it as soon as I can get it to fly more level, and gear it a little higher. Ordered a 16T Mod 1 pinion along with upper and lower arms, ofna cnc motor heatsink and....

    ONE OF THESE.

    [​IMG]
     
    DanglingFury, May 10, 2012
    #6238
  19. May 10, 2012 at 3:40 AM
    #6239
    DanglingFury

    #6239
    DanglingFury Creeper

    Joined:
    Sep 21, 2010
    Member:
    #43614
    Messages:
    3,877
    First Name:
    Keith
    Bowling Green, KY/Lake Cumberland, KY
    Vehicle:
    2006 4Runner 4x4
    Daystar 2.5"/1" lift-level BFGoodrich KO2's
    Shot of the circle track they run the jato's on.

    My little ofna ran circles around their jatos, and I've had maybe 1/5th of the practice they've had. I could hold it wide open all the way around.

    [​IMG]
     
    DanglingFury, May 10, 2012
    #6239
  20. May 10, 2012 at 3:41 AM
    #6240
    mjbtaco

    #6240
    mjbtaco low and slow

    Joined:
    Mar 21, 2008
    Member:
    #5423
    Messages:
    4,812
    Gender:
    Male
    First Name:
    Michael
    Montclair , so cal
    Vehicle:
    Turbo'd 95.5 extra cab and 2013 Silver DCSB TRD Sport
    PERFORMANCE Custom Turbo Setup FRONT SUSPENSION Drop Spindles by Aaron Carswell 01-04 Swaybar Endlinks Energy Suspension Endlink Bushings Cando Upper Control arms QA1 coilovers with 8" spring Custom 4 pot Brembo BBK Modified lower control arms with mjbfab qa1 mounting plates and Poly bushing sleeves REAR SUSPENSION Chasis Tech drop leafs QA1 adjustable shocks weld in drop notch Gas tank cross member bridge 3" angled blocks 2013 Double Cab Short Bed TRD Sport Eibach Pro Truck Shocks front and rear Lifted to the 3rd setting on the front shocks

    the wonders of 4wd haha. u paint the body yet?
     
    mjbtaco, May 10, 2012
    #6240
Page 312 of 1086

Products Discussed in

havcybin Turbo Racing P32 91803G-C 2.4G 4CH RC Remote and Receiver Controller LCD Display with Waterproof Radio Transmitter for RC Car Boat (91803-C)
$36.99
Modified TK7.0 Edition 1/16 2.4ghz Remote Control US M4A3 Sherman Tank Model(360-Degree Rotating Turret)(Steel Gear Gearbox)(3800mah Battery)(Metal Tracks &Sprocket Wheel & Idle Wheel)
$229.99
CXWXC Bike Repair Stand -Shop Home Bicycle Mechanic Maintenance Rack- Whole Aluminum Alloy- Height Adjustable (rs100) (A: Champagne)
$72.48
Hobbywing QUICRUN WP 1080 G2 Brushed 2-3s ESC
$39.99
ZOSKAY RC Servo 35kg PRO Coreless Motor servo Metal Gear Digital and Stainless Steel Gear servo RC servo for Robotic DIY RC car (180 Degree)
$34.99
INJORA 1.0 Silicone Rubber Inserts and S5 Rock Terrain Crawler Tires for TRX4M SCX24 1/18 1/24 RC Crawler Car Upgrade
$19.98
BRCatWPark RC 1.0" Beadlock Wheels and Tires for 1/18 TRX4M,1/24 Axai1 SCX24 RC Crawler Car,4PCS Alloy Aluminium 1.0 Beadlock Rims Tires Wheels Rims,Bronze
$24.99
LCX Racing 1/10th RC Crawler Car DIY Nylon Roll Cage DIY Nylon Roll Cage Spare Tire Rack for TRX4, Upgrades Parts Accessories
$20.99
ACTIVA CelluClay Instant Paper Mâché, White, 4lb (1.8kg) Sculpting & Texturing Material for Arts & Crafts
$34.79
AMACO AMO41821 SC3 Sculptamold Modeling Compound, 3 lb.
$19.20
MOHERO 4Pcs 2.2 Extended Beadlock Wheel Rims for 1/10 Axial SCX10 II 90046 and 1/14 MJX 14210 RC Crawler Car Upgrade Part (Red)
$46.99
RCMYou 2.2 Beadlock Wheels Adjustable 4 Offsets Rims for 1/10 SCX10/AMG 6x6 TRX4/TRX6 D90 Gen8 VS4-10 Gen8 MST CFX,2.2 Beadlock Wheels,Titanium Black
$52.99
SunFounder Latest 10" DIY Touch Screen All-in-One Solution for Raspberry Pi 5, IPS HD 1280x800 LCD, Built-in 5.1V/5A Output, HDMI, 10-Point, No Driver, Speakers, for RPi 5/4/3/Zero 2W
$145.99
ATKBLT Ball Link Tools: Turnbuckle and Sizer for RC Helicopter
$9.99
Blade Deluxe Ball Link Pliers All BLH100 Heli Option Parts & Accessories
$18.95
INJORA High Clearance 4 Links Set Stainless Steel Linkage kit for Axial SCX24 Gladiator Dodge Power Wagon 1/24 RC Crawler Upgrade Parts(Silver)
$17.98
CrazyHobby 274Pcs RC Screw Kit RC Repair Kit M1.4 Screws for Axial SCX24 Bronco Deadbolt Gladiator Chevrolet C10 B17 Betty Wrangler JLU 1/24 Crawler Upgrades
$15.99
INJORA 1.0 Beadlock Wheel Tires Set -3.78mm Offset Wheel Rims for 1/18 1/24 RC Crawler Car Axial AX24 SCX24 FMS FCX24 TRX4M,Grey (W1004-T1014)
$34.99
FLASH HOBBY 2PCS FH-2502 Nano Servo 2g Steering Gear with JST 1.25 Interface for RC Micro Indoor Aircraft Airplane Engine Spare Parts (JST1.25)
$12.59
INJORA 1.3" XHX Pin Tires for TRX4m SCX24, 72 * 24mm, S5 Compound, 4PCs
$16.98
LDARC 1:43 Scale Mini RC Crawler RTR RC Rock Truck 4x4 2.4GHZ Hobby Grade Remote Control Car Model Vehicle RC Buggy, Comes with a DIY Replaceable Body Shell(Desert Yellow)
$139.90
Nexus Self Adhesive 12" Vinyl Floor Tiles, 20 Tiles - 12" x 12", Black Pattern - Peel & Stick, DIY Flooring for Kitchen, Dining Room, Bedrooms & Bathrooms by Achim Home Decor
$12.10
FMS 1:18 RC Vehicle Parts for Land Cruiser/FIRE Horse:Drive axle Metal Gear-C2056
$11.99
FMS Upgrade Parts for FCX24 :Metal Differental-C3061 for 1:24 Smasher, Power Wagon, K5 Blazer
$19.98
INJORA RC Rims 4pcs 1.9" Beadlock RC Wheel Rim Set Wheel Hub for 1:10 RC Crawler Axial SCX10 SCX10 II 90046 SCX10 III AXI03007 TRX4 D90 12mm Hex (Black&Gray)
$38.97
Pownergy AAA Batteries 1.5V Lithium ion AAA Battery Rechargeable Batteries, 1100mWh High Capacity with Micro USB Cable 2H Fast Charge Long Lasting Li-ion AAA Batteries 4 Packs
$24.99
DEWALT 8V MAX Cordless Screwdriver Kit, Gyroscopic, 2 Batteries and Charger Included (DCF680N2)
$123.99
BEZGAR TB141 RC Cars-1:14 Scale Remote Control Car, 2WD High Speed 20 Km/h All Terrains Electric Toy Off Road RC Car Vehicle Truck Crawler with Two Rechargeable Batteries for Boys Kids and Adults
$45.99
Cheerwing 1:10 Scale Rock Crawler 4WD Off-Road Remote Control Truck Large Hobby RC Car for Adults
$199.99
Pro Boat Sprintjet 9" Self-Righting Deep-V Jet Boat Brushed RTR Ready to Run Blue PRB08045T2
$119.99
RC Hex Driver Set - 7pcs Hex Allen Screwdriver Kit 0.9mm 1.27mm 1.3mm 1.5mm 2.0mm 2.5mm 3.0mm Key Driver Repair Tools for Rc Car Traxxas Helicopter
$20.97
Makerfire 4pcs Hex Nut Drivers Screw driver Tools Kit Set for RC Helicopter RC Boat Rc Cars, Metal 4.0/5.5/7.0/8.0mm NUT Key Socket Screwdrivers
$26.99
HAIBOXING RC Cars 16889, 1:16 Remote Control Car for Adults, High-Speed 36km/h RC Trucks RTR RC Crawler 2.4G All Terrain Waterproof Off-Road Vehicle with 2 Batteries Gifts for Kids, Boys 8+
$86.99
uxcell 2.5 x 12mm(Approx 3/32") Dowel Pin 304 Stainless Steel Wood Bunk Bed Dowel Pins Shelf Pegs Support Shelves 25Pcs
$6.69
Losi Front Shock Springs 3pr Mini-T Mini-B LOSB1117 Electric Car/Truck Option Parts
$13.45
Tenergy TB-6AB Balance Charger Discharger 1S-6S Digital Battery Pack Charger for NiMH/NiCD/Li-PO/Li-Fe Packs w/ LCD Display Hobby Battery Charger w/ Tamiya/JST/EC3/HiTec/Deans Connectors + Power Supply
$39.99
Aoyue 469 Variable Power 60 Watt Soldering Station with Removable Tip Design- ESD Safe
$29.99
usmile RC Night Flying 12V 1.5W Super Bright RC LED Head Lights Drone LED Light Illuminator for Carbon Fiber Quadcopter Frame Multirotor QAV250 ZMR250 QAV180 ZMR180 FPV Quadcopter(4pcs)
$10.89
TAMIYA Polycarbonate PS-22 Racing Green TAM86022 Lacquer Primers & Paints
$7.00
Pro-Line Racing 72 Chevy C10 Long Bed Body ClearRevo 3.3LSTMGT PRO322700 Car/Truck Bodies Wings & Decals
$43.99
RC4WD Z-S0632 Tough Armor Solid Rear Bumper SCX10 Chassis
$37.99
RC4WD Rock Creeper 1.9 Scale Tires RC4ZT0049
$25.99
To Top