Anyone running a 275/70r16?

I will be needing new tires in a few months and was just curious if anyone is currently, or have in the past, ran a 275/70r16? If so what all was involved to clear that size? Wouldn't mind getting some 5100's and or wheel spacers if needed, but I'm just trying to go with a modest upsize. I understand you can run the 265/75r16 on a stock trd, but that is also a narrower tire than the stock 265/70r16. Any input would be greatly appreciated. And yes I did search before posting so please spare me the hazing...

 

Not sure if anyone makes a 275/70/16. No, 265/75/16 is the same width as 265/70/16. Just slightly larger.

 

265 is the same width as 265

I am running 275/70/17 with no rub

I am lifted 2 1/2" in front and have LR UCA's , but there is no rub on my UCA's at that width

 

i ran a set of 275/70/16 Bfg AT's fine when i was stock, it was only about 3/4 from making contact with the uca depending on what your back spacing is it could be a problem but they fit just fine for me.

 

IIRC the tire comparer I use at work was saying you loose actual width in the tread contact (only a half inch but still). Michelin offers the orrigional LTX M/S which should get 80k+ on our truck. Sounds enticing. Thanks for the help guys- livel0veryde

 

General makes a 275/70R16, I just ordered a set from Discount Tire Direct, about $125 each, shipped. Grabber UHP is the model and get this, made in USA! (Continental owns General now).
Ordered some wheels too, so haven't mounted them yet.

 

PN 43428 LTX M-S
PN 98835 LTX M-S
PN 72538 Latitude Tour HP

I think these may have been discontinued as they seem hard to find.
GG

 

Anyone have pics of 275/70r16 on their tacoma?

 

No pics, but they look great! No regrets, gas mileage did not go down either.
PM your email and I'll send over a couple.