Anyone using 4runner trail wheels on there 3rd gen? post pics

Should be fine. Here are some pics from back in the thread that look like OEM mudflaps.

 

Keeping it classy with plasti Dip and Yokohama geolander MTs

 

Not sure what wheel you are talking about. But I was running 265/70/17 Ko2's on TRD SEMA wheels (17x7ET4) on stock suspension and I had no rub on street. But I would barely touch the passenger mud flap if the suspension was compressed while turning. I could have very easily just pushed the mud flap plastic in with a heat gun. Ive since done a 1" lift up front with 6112/5160's and have no rub anymore.

 

Was referring to the 7 spoke 4Runner wheel this thread is related to.

 

Sorry. I assumed this thread was for all T4R wheels.

 

37s and 4runner wheels is cool

 

Here's a picture of 265/70/17 BFG's with factory mud flaps. The wheels came off my 2018 T4R Off Road Premium that were PVD black chrome plated. No fitment issues with all stock TRD sport suspension.

 

Thanks gents! Snagged a set of brand new wheel and tire takes offs from 2022 swapped out before they left the dealership. Still have to swap the TPMS but couldn’t wait. Love how these pop compare to the stock sport wheels

 

stock suspension?

 

Hi. Does anyone have the trail rims in a 285/70/17 with a 3 inch lift?

 

Joined the club today.

 

Thanks to @Roadkill1081 for the idea to remove chrome trim rings- looks much better. I kept the chrome Toyota logo and lugs. Confirming weight is 29 lbs (including cap).
Offset is improved with a great looking OEM quality wheel. I calculated .6” movement towards outside wheel well compared to TRD off road 16x7” wheels.
Specs: 2”/1.5” lift, no spacers, 265/70R17 Baja Boss AT

 

Those are the new OEM Trail wheels from Toyota? They are not custom powder coated?

Looks really good with mint green.

 

Yes, OEM take offs from a ‘22 4Runner Trail Edition. I’m not on the black wheel trend. I questioned if I would even like this dark gloss gunmetal, but the contrast against lighter color Lunar Rock ‘Cemint’ is a winner for me!

 

Nice combo.

 

Glad I could help someone out. They're definitely a good alternative if you want something OEM in a dark color. Plus they are much easier to keep clean than the SEMA's.

 

**This- I had SEMA’s on my 4Runner. They were terrible to clean.

 

Thanks for sharing your photos. I have a Cement Gray Tacoma and found a set of these gray 4Runner wheels that I'm trying to pick up. Was the chrome trim ring on the center cap just glued on or is it on clips? Does it just pop off?

*edit: went back and found the post that it's just little tabs holding on the chrome trim ring*

 

It's just an aluminum ring with about 5 or six tabs that are bent to keep it attached to the plastic. You just straighten them out and it comes right off.