Anytime Backup Camera Issue

Today I installed the Anytime Backup with the upgraded Natika front camera on my 2020 Offroad. I have the correct kit for my 2020, but when I went to test it, the switch doesn't do anything unless I put it in reverse. I've made sure the wiring connections are correct and tight. I've even tried switching my ground to a different location. In reverse, the system works as advertised. Its like the override harness is not working. Is there something I'm missing???

Any help would be greatly appreciated!

 

i would go back thru everything and check all 3 ground wires, check all the wire connections, check to make sure harnesses are seated all the way and check to make sure it's all wired properly.

if all else fails call brian at anytime. i've heard he's great to deal with...

 

I spoke with Brian and he was awesome. He was even going to ship me a new wiring harness free of charge to try and help trouble shooting the issue. With his help it was actually the orange wiring not getting enough of a connection. I replaced the connector and bam it was working like advertised. The front camera actually displays a better image then the camera in the rear.

 

good deal, glad it all worked out