Army Green thread: let’s keep it green!

Yeah, I’ll probably do both. I’d hate to be part of the problem I’m running into. Good thing you asked today, I won’t be able to crawl out of my sunroof as of tomorrow

They’re jet black when clean btw

 

I did the same thing with mine but I used a T-rex chasing taco instead. Where did you get godzilla?

PS, how were you able to get the sticker way deep down on the glass like that? I wasnt able to due to the small crevice.

 

We made the sticker with a Godzilla image from the internet and with my wife's Cricut machine. As for getting it down in that location... it was not easy at all. Almost lost the stickers as it slipped into the dash. Had to squeeze my hand and a knife to get it there.

 

Stay tuned

 

Looks like someone has a project for today.

 

Neighbor bought one of these but hasn’t installed it yet. Looked them up after he told me and I thought I needed to have one! Excited to see it. Is it the black one? I see they make it in army green but I thought black might look better

 

So this just happened....

 

What da hell? Never seen that before! Is that a smiley face on the first pic? Did you do anything in particular or is that just random?

 

I got the Alpha rack with army green outer fairings. you can see them together near the box.

Unfortunately the package was missing the 4 Baja designs rock lights for the side 'scenepods', so I'm holding off on the install for now.

Also gotta get that SwitchPros in first...

 

New mod done

















Also installed the CaliraisedLED 0 degree bolt-on sliders (with kickout).








I watched the instructional video on YouTube several times and had it on hand to reference. He makes it look so damn easy. The hardest part the first time was lining up the 14mm bolt on the underside to hold up the slider. I could not do it without actually being under the slider so I could see the hole. Also, I think there are some minor changes to the 2020 Tacoma that made a few bolts more difficult to install. Seems solid enough so far. I'm going to go over them next week to tighten up anything that may have loosened.

I do have the fill plates, but I'm going to see about getting them powder coated Army Green to make a nice two-tone effect.

 

Here is an update y’all should appreciate.

 

Curious, do you all use anything to clean the black exhaust tip? Can’t think of anything that would polish it up to make it look like original again.

thanks!

 

Thanks for taking these pics. Much appreciated

 

What's happening to yours? I just hit it with a mist of spray wax (Meguiar's X-Press) and wipe it off when detailing the truck. Mine still looks new.
But it is only 4 months old.

 

Anybody with aftermarket wheels? Wanting to throw bigger tires on a set of ray 10 or methods and keep my stockers for road tripping. What offset you guys running and tire?

 

I am running the SCS Stealth 6 in 17x8.5 -10 with 285/70/17. In my opinion I think it is the perfect width and offset for the truck.

 

Stock height? Do you think you could cram an 75 under there? Also any trimming

 

I am lifted 2.5 Front and Rear and I am also running the Dobinson UCA's with a CMC done. I currently have zero rubbing even when fully stuffing the front at full lock. 285/75 is going to be my next size but I have a feeling it will require some hammering of the pinch weld for clearance. The good thing about the 285/70/17 is that it fits under the truck in the stock location.

 

Running Fuel Vapors 11 mm off set best I remember. Falcon WildPeak A/T3W 275/65/18's. Went with that size to get a C rated tire.
That way I get under 50 lbs/tire. 32.1" tall. I get a little rub on the drivers mudflap at partial turn when the front is compressed
some. (stock Fox) Nothing I'm gonna worry about.

 

Looking good!