AZ BS Thread 2.0

Oh, the inner seals. Check output shafts for oil leaks. My rear diff output shaft inner seal was ten bucks. Easier to rebuild it right the first time, then having to pull it

 

Hahaha. Awesome.

15 bucks! out of the nose is putting it lightly. Lol

Get that shit done already man!

 

Wait, his shit still isn't done!? Wtf!

Hey jumper, I'm thinkn rear frame plates, id prefer to box the frame, but outter ones will work just as well?

What about strengthening the rear axle? Ill be pulling it to get diff rebuilt, figure its the right time, right?

 

Well he had It finished, but It was the wrong ratio.. so he has to swap the new one in that IS the right ratio.. but it had a bolt seized.. but now that its out.. he SHOULD be done. You better get It done Garrett!! lol

 

Damn dude. That bolts been in there for a while huh

 

Am I in a time warp? It sure seems like your talking about erics truck but there is no mention of erics truck. Somehow I knew thats what you meant though

Im not going to box my whole frame, I think I am just going to do the outer plate and box the inside just where the bumstop is. But I am also going to do a whole bed cage. From what I have seen you cant go wrong boxing the entire frame if you dont mind dropping the tank, pulling the bed, etc etc. Its the same with most fab work, the prep is what takes most of the time

For the axle I doubt you will need to truss it. Most of the guys using leafs do not truss it, it really becomes a problem with links though

 

It was retarded.. Lol. Some of the sealant, like RTV, got in the threads and locked It up. Had to grind the head off and then it just unscrewed. Lol

 

For sure. Im in the midst of a project now

 

And what thou shall be??

 

Wouldn't you like to know!

 

Well f off then. Lol

 

Haha Im welding my steering column and going to autozone to replace my dome light.

and if Im smart enough, going to try and make the 4wd light come on for shits and giggles

 

Ahhh. I see. What about the output seal? You gonna do that too? Mr productive today huh? Lol

 

Maybe, but like I said autozone can suck it for 15 plus tax for a piece of rubber, might buy those later on

 

I want a new catalytic converter and 02 seonsors, i don't have a cel but I don't trust them.

 

Lol. Hey, you ever figure out what that exhaust sound was?

 

I turned the truck on and then got underneath it, and I didn't hear anything? whats it sound like

 

I told you. Like an exhaust leak.. and It was during acceleration. Like a pingy sound. Leak,rattle,etc.

 

Just wait till emissions to see if you pass.. Best way to find out if your cat is shot and its not throwing a code.

 

Well ineed to droptank to xlean it out, and put new cab mnts too. I'm hiring everyone on tw with beer and pizza to help.