AZ BS thread...

Damn. I get hook ups left and right. I got free food at Paradise Bakery today. I got to cut in line at Pei Wei because I know people there and was flirting with the hot girl that works there while I was waiting for my bosses food to be done. Gotta love that charm.

 

Way to go lover boy

 

It was a total bonus that she was working today.

 

hahah nice^

ohh and today i got an OEM fog lamp switch and for my solteks. I didn't know that it was ganna have internal lighting!

and the blue wire connector behind the lower dash cover that doesn't attach to anything.....plugs into the switch, and it already has power.

so all i had to do was solder the power wires to it and plug it in. super easy and it looks stock

 

ohh, and alex, are you ganna be in t-town this weekend?

 

Nice!

Yeah I'll head down on Saturday. Should I leave here around 10AM? Cliff was thinking of hitting some trails also.

 

hahahahahahaha

http://gizmodo.com/5521307/girlfriend-body-pillow-the-saddest-place-to-lay-your-head

its perfect for you CMack I hear you are not so hot with the ladies

 

lol... that's just.... lol.

 

she has to know that you exist before you can say that.....sitting outside her house hoping she doesn't see you doesn't count

 

Any of the AZ guys know what size our windshield wipers are? The store doesn't have the little booklet to look it up

 

i think.. it's 20" for the driver and 19" for the passenger

 

2nd gen= 22 drivers , 21 passengers... I use Rain X from the website:

Azbackcountry

 

Thanks.


I have your bed bars also.

 

Hey Alex,

Did Matt send a set of bed bars for me as well ?

PRBulldog36

 

Yes I have them in my garage. They look great

 

My wipers are 21" and 22" on my 2nd gen

 

random question, when you get swirl marks, can you buff them out for good? or is only until they was wears off?

 

When will be a good time pick them up ?

 

taken from here: http://www.toyotanation.com/forum/showthread.php?t=126755&highlight=detail

Swirls

Incorrect use of a buffer or polisher can be a leading cause, but it's not the only cause of swirl marks. Every time you wash or wipe down your vehicles paint you create micro-marring. The severity of the micro-marring depends on your tools and the contaminants present. IMO, here are the ten most frequent causes of micro-marring (swirl marks):

1. Polishers/buffers with the incorrect pad or an untrained operator;
2. Harsh polishing compounds and paint cleaners;
3. Towels and applicators containing polyester threads;
4. A dirty chamois or a chamois that has not been properly maintained;
5. Wiping down a dusty or dirty car with a dry towel;
6. A dirty car duster or a car duster used on a car with too much dirt on the surface;
7. Not keeping your wash mitt or sponge properly rinsed;
8. Automated car washes with brushes and other wipers; (aka Swirl O Matics)
9. Not rinsing your vehicle completely before washing, or not washing your car thoroughly before drying; and
10. Using a truck cover when the truck or the cover is not clean.

The most noticeable area for swirl marks is the hood and trunk or tailgate. On dark-colored vehicle, they might also show up on the doors and fenders. Bright colors do not show swirl marks as well because they reflect more light. That doesn't mean they don't get swirl marks, they just show up more readily on dark colors. Black, of course, is the worst of all colors for displaying swirls and other imperfections. Which is why I have a black Taco. I love a challenge.

Swirl marks can be removed by polishing. Polishing out swirl marks without a buffer is a lot of work. I recommend polishing your Taco one small section at a time so you can see the progress.

To remove swirl marks, use a good medium cut polish. If you have some real neglected paint or scratches then you might need to step up to a more agressive polish.

Basically:
To keep water spots to a minimum, try using a detailing spray after you wash. I also will spray some quick detailer in the bucket to add some extra lubrication to the soap. Lubrication is the key to reducing microscratches and marring. Keep your vehicle in the shade, and dry it off ASAP.

To keep swirl marks to a minimum, make sure you have good wash and dry tools. Never wipe, rub or polish in circles (straight line motions only), and be very careful when you use buffers and polishers. If you have repair work done on your vehicle, tell the painter you want a warranty against swirl marks. This lets them know you're clued in to a quality job.
Regular polishing is the best way to remove water spots and swirl marks. Choose a good polish, good tools, and be patient.